Back to search

University of Victoria (Canada)

Measurement of forces in a low consistency refiner

Abstract

dc:description.abstract

A piezo-ceramic sensor was developed to measure normal and tangential shear forces applied to a bar at one location in the refining zone of a Sunds Defibrator Conflo® JC-00 refiner. Testing was completed at the Pulp and Paper Research Institute of Canada in Vancouver. BC using CTMP pulp with a stock consistency of 3.15%. Distributions have been determined for peak normal and shear forces. peak coefficient of friction. shear work. and shear lead. These distributions were analysed to assess possible correlations with specific edge load. Force magnitudes were found to increase with an increase in specific edge load. The peak coefficient of friction was calculated that ranged from 0.13 to 0.16. Both the normal and shear force magnitudes varied by as much as a factor of 3, due to rotor out-of-tram of only 0.06 mm. These distributions could provide greater insight to the mechanisms responsible for fibre development in papermaking and thus "In Process" control of various refiner conditions.

Degree

thesis:*
Level thesis:degree_level
Master of Applied Science M.A.Sc.
Department thesis:degree_department
Department of Mechanical Engineering
Year dc:date.issued
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Prairie, Brett Cameron
Advisor dc:contributor.supervisor
  • Wild, Peter Martin

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • Available to the World Wide Web
Language dc:language.iso
en, English

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1828/1920

Chain of custody

source
Harvested from
University of Victoria (Canada)
Base URL
dspace.library.uvic.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Prairie, Brett Cameron. Measurement of forces in a low consistency refiner. Master of Applied Science M.A.Sc. thesis, 2009. http://hdl.handle.net/1828/1920