University of Victoria (Canada)
Current sensorless control of a boost-type switch-mode rectifier using an adaptive inductor model
Abstract
dc:description.abstractThe present work describes the development of a control scheme for boost-type switch-mode rectifiers. While controllers for this circuit commonly use a shunt resistor or a magnetic field sensor to measure the instantaneous input or inductor current, here the inductor current is computed from the measured inductor voltage. This calculation requires knowledge of the physical properties of the inductor, most importantly its inductance, which are prone to change with operating conditions of the converter and throughout the lifetime of the inductor. The parameters of the inductor model are estimated during normal converter operation, and the inductor model is adapted accordingly. Simulation and experimental results confirm the effectiveness of the devised scheme in reducing the distortion of the input current.
Degree
thesis:*- Level thesis:degree_level
- Master of Applied Science M.A.Sc.
- Department thesis:degree_department
- Department of Electrical and Computer Engineering
- Year dc:date.issued
- 2013
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Engel, Adrian
- Advisor dc:contributor.supervisor
-
- Nandi, Subhasis
Subjects
dc:subject × 4Rights
dc:rights- Statement dc:rights
-
- Available to the World Wide Web
- Language dc:language.iso
- en, English
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- http://hdl.handle.net/1828/4637