Back to search

Virginia Commonwealth University

Performance Comparison of Layered Composite Bimodal Fiber Mats with Unimodal Fiber Mats

Abstract

dc:description.abstract

The study was conducted to evaluate and compare performance of unimodal and bimodal mats with approximately same mass. 10% and 18% Nylon 4, 6 polymer solution were used for electrospinning the fibers. A negative ion source was used to neutralize the surface charge. The fiber diameters were measured with SEM and were <500 nm thus incorporating the slip effect. Bimodal mats were prepared from different deposition modes. Optimal mode was selected on analyzing the performance factors. The bimodal mats were then compared with unimodal mats. For their performance the fiber mass for these mats was approximately the same. It was observed that the unimodal mats had higher efficiencies and higher pressure drop giving a lower FOM. Bimodal mats showed lower efficiencies and pressure drop compared to unimodal mats. However, the FOM for bimodal mats was approximately 200% higher than unimodal mats

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Nuclear Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kulkarni, Sukhada Sanjay
Contributors dc:contributor
  • Gary Tepper

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • © The Author

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Virginia Commonwealth University
Base URL
scholarscompass.vcu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Kulkarni, Sukhada Sanjay. Performance Comparison of Layered Composite Bimodal Fiber Mats with Unimodal Fiber Mats. Thesis thesis, https://doi.org/10.25772/VM7G-ZJ88