Back to search

Virginia Commonwealth University

Imide/Arylene Ether Copolymers

Abstract

dc:description.abstract

Three different series of imide/arylene ether block copolymers were prepared using two different imide blocks and two different arylene ether blocks. Block molecular weights studied were 3110 and 6545 g/mole for each block and all four combinations possible were prepared in each series. Also, several segmented copolymers were prepared by forming the imide segment and the copolymer in the presence of the pre-formed arylene ether block. Two amine-terminated poly(arylene ether) blocks (ATPAE) were prepared by reacting 1,3-bis(4-fluorobenzoyl)benzene with either 2,2-bis(4-hydroxyphenyl)propane (BPA) or 9,9-bis(4-hydroxyphenyl)fluorene (BPF) and 4-aminophenol. Two anhydride-terminated poly(amic acid) blocks were prepared by reacting 4,4'-oxydianiline (ODA) or 1,3-bis(4-aminophenoxy-4’- benzoyl)benzene (BABB) with 3,3',4,4'-benzophenonetetracarboxylic dianhydride (BTDA). The ATPAEs were reacted with the anhydride- terminated poly(amic acids) to provide block copolymers which were either thermally or solution imidized. Thermal imidization was accomplished by heating 1 h each at 100, 200 and 300°C while solution imidization was accomplished by adding toluene to the reaction, heating to 155°C overnight and collecting the toluene/water azeotropic mixture in a Dean-Stark trap. Some of the block copolymers displayed two Tgs indicating incomptability and phase separation, especially for the higher molecular weight blocks. The copolymer series preapred by reacting the ATPAE (BPA) blocks with the ODA/BTDA blocks in N,N-dimethylacetamide (DMAc) had inherent viscosities as high as 1.37 dL/g. The copolymer series prepared by reacting ATPAE (BPA) blocks with BABB/BTDA blocks in DMAc or N-methyl- pyrrolidinone (NMP) had inherent viscosities as high as 1.73 dL/g. The copolymer series prepared by reacting ATPAE (BPF) blocks with BABB/BTDA blocks in DMAc, NMP or m-cresol had inherent viscosities as high as 1.08 dL/g. The copolymers were characterized by differential scanning calorimetry (DSC), torsional braid analysis (TBA), thermogravimetric analysis (TGA) and wide angle x-ray diffraction (the BABB/BTDA imide is semi-crystalline). Mechanical properties were measured on copolymer films and fracture energies were measured on moldings. One copolymer was end-capped at a controlled molecular weight to improve processing and evaluated as an adhesive and graphite composite matrix. The chemistry and properties of the copolymers will be discussed and compared to those of the homopolymers.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Chemistry

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jensen, Brian J.
Contributors dc:contributor
  • Robert G. Bass

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • © The Author

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Virginia Commonwealth University
Base URL
scholarscompass.vcu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Jensen, Brian J.. Imide/Arylene Ether Copolymers. Dissertation thesis, https://doi.org/10.25772/PR5B-2034