Back to search

Virginia Commonwealth University

On-Demand Electrically Induced Decomposition of Thin-Film Nitrocellulose Membranes for Wearable or Implantable Biosensor Systems

Abstract

dc:description.abstract

Implantable or subcutaneous biosensors used for continuous health monitoring have a limited functional lifetime requiring frequent replacement and therefore may be highly discomforting to the patient and become costly. One possible solution to this problem is use of biosensor arrays where each individual reserve sensor can be activated on-demand when the previous one becomes inoperative due to biofouling or enzyme degradation. Each reserve biosensor in the array is housed in an individual Polydimethylsiloxane (PDMS) well and is protected from exposure to bodily fluids such as interstitial fluid ( ISF) by a thin-film nitrocellulose membrane. Controlled activation is achieved by decomposing over an individual sensor well. Electrically activated thermal decomposition of the nitrocellulose membrane is caused by passing an electric current through an Au/Ti filament placed on top of the membrane. By applying an energy of as low as 7 mJ to the Au/Ti filament with cross-sectional area of 8 x 107 cm2, a current density of ≈ 105 – 106 A/cm2 causes explosive decomposition of thin-film Au/Ti filaments. Having a thermal decomposition temperature of ≈200°C, nitrocellulose is locally heated directly under the Au/Ti filament. This leads to opening of the nitrocellulose membrane within 50 ms allowing for exposure of biosensor to biofluids. 50 ms is sufficiently short to prevent local heating of surrounding tissues and therefore is not a danger to a potential patient.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Electrical & Computer Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Horstmann, Benjamin M
Contributors dc:contributor
  • Vitaliy Avrutin
  • Umit Ozgur
  • Vamsi Yadavalli

Subjects

dc:subject × 13

Rights

dc:rights
Statement dc:rights
  • © Benjamin M Horstmann

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Virginia Commonwealth University
Base URL
scholarscompass.vcu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Horstmann, Benjamin M. On-Demand Electrically Induced Decomposition of Thin-Film Nitrocellulose Membranes for Wearable or Implantable Biosensor Systems. Thesis thesis, https://doi.org/10.25772/HSQC-QJ84