Back to search

Virginia Commonwealth University

Laser Ablation-Induced Corrosion Resistance for Molten Salt Equipment Materials Evaluated Utilizing Electrochemical and Spectroscopic Analysis

Abstract

dc:description.abstract

Advanced reactors and used nuclear fuel separation (i.e. pyroprocessing technology) utilize high temperature salt as a thermal storage medium as well as an ionic solution for electrochemical processes. The use of these aggressive molten chloride and fluoride mediums requires specific materials or additional system alterations to extend the lifetime and structural integrity of equipment due to corrosion. Some materials, in the presence of inherently impure salt, will corrode and form oxide films in a specific formation that decreases corrosion rate by electrochemically and physically preventing elemental movement to the material surface. This is referred to as a passivation layer. However, this naturally forming passivation layer tends toward two flaws: 1) a spatially incomplete layer with imperfections that are prone to localized pitting and 2) for aluminum oxide or alumina-forming alloys specifically, the initial layer made of metastable alumina phases at molten salt temperatures is prone to lower density and therefore shows a smaller change in corrosion mitigation as compared to denser phase layers. By facilitating the pre-passivation of both alumina-forming alloys and approved molten salt structural material, this work proves the marked decrease in molten salt corrosion through forced high-density oxide layering via the use of laser ablation. Laser-Induced breakdown spectroscopy (LIBS) has been simultaneously used as a method of metal ablation as well as an initial verification tool for the successful application of the aforementioned passivation layer. This change in corrosion mitigation has then been verified via electrochemical testing, to include corrosion rate calculation and impedance-based film analysis. Ultimately, a comparison of laser treatment options, LIBS spectra, and corrosion rate data is provided to verify this claim, with planned future work required to increase the treatment viability as well as potential use cases for related work.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical and Nuclear Engineering

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Milota, Peggy
  • https://orcid.org/0009-0004-3820-2166
Contributors dc:contributor
  • Jessika Rojas
  • Supathorn Phongikaroon

Subjects

dc:subject × 8

Rights

dc:rights
Statement dc:rights
  • © The Author

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Virginia Commonwealth University
Base URL
scholarscompass.vcu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Milota, Peggy; https://orcid.org/0009-0004-3820-2166. Laser Ablation-Induced Corrosion Resistance for Molten Salt Equipment Materials Evaluated Utilizing Electrochemical and Spectroscopic Analysis. Dissertation thesis, https://doi.org/10.25772/921F-X485