Virginia Commonwealth University
Dielectric Grating Integrated Hg1-xCdxTe (Mercury Cadmium Telluride) Infrared Photodetectors for High Operating Temperature
Abstract
dc:description.abstractMercury cadmium telluride (Hg1-xCdxTe, MCT) infrared photodetectors typically require cryogenic cooling to suppress thermal noise, limiting their adoption in size, weight, power, and cost (SWaP-C) constrained military and commercial systems. This dissertation investigates dielectric grating array integration as an extrinsic route to high operating temperature (HOT) detection in Auger-suppressed MCT architectures. Finite element modeling shows that a grating assisted light coupling into a subwavelength (1.5 µm) Hg0.762Cd0.238Te mid-wave infrared layer acting as an absorptive waveguide, achieves photocarrier generation rate comparable to a conventional bulk (e.g., 5 µm) layer. For long-wave infrared detectors, coupled FDTD and drift-diffusion modeling, together with a photocurrent-to-dark-current thickness optimization framework, resolves the trade-off between carrier collection efficiency and absorption (i.e., quantum efficiency). A polarization-independent dielectric grating raises mean responsivity from ~1.4 A/W to ~3.8–5 A/W (λ 10–12 µm) and detectivity from ~8.4×10⁸ to ~4.2×10⁹ cm√Hz/W at 10.9 µm, transforming the spectral roll-off into a steeper decline. A fabrication process for gratings on thin Hg0.7Cd0.3Te is developed that limits thermal and structural degradation, and FTIR measurements exhibit reduced transmission. Infrared variable angle spectroscopic ellipsometry (1.67–29.5 µm), supported by transmission and complementary measurements (e.g., cross-sectional SEM), yields Kramers-Kronig-consistent dispersion over 2.5–4.1 µm that agrees with measured spectra and departs substantially from empirical relations. Finally, a fabricated separate absorber carrier multiplier–field effect transistor MCT detector reaches a room-temperature peak detectivity of ~2.4×10¹⁰ cm√Hz/W. These results provide design and characterization guidance for next-generation MCT HOT focal plane arrays in low-SWaP-C imaging systems.
Degree
thesis:*- Name thesis:degree_name
- Doctor of Philosophy
- Level thesis:degree_level
- Dissertation
- Discipline thesis:degree_discipline
- Electrical & Computer Engineering
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Sojib, Mohammad Ariful Hoque
- https://orcid.org/0000-0002-5906-2076
- Contributors dc:contributor
-
- Dr. Nibir K Dhar, Professor, Department of ECE, VCU
Subjects
dc:subject × 9Rights
dc:rights- Statement dc:rights
-
- © The Author
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://scholarscompass.vcu.edu/etd/8508