Back to search

Institutional Repository of Vilnius University

Multiskalinių darinių formavimas kombinuojant vienfotonę ir daugiafotonę litografijas /

Abstract

dc:description

In this work fabrication of multiscale structures by combining the advantages of two optical 3D lithographies (O3DL) was demonstrated. „Asiga“ „Pico2 39 UV“, a tabletop optical 3D printer (O3DP) based on the working principle of digital light processing stereolithography (DLP SLA), was used for macro forming, in this case for the production of millimeter-scale structures. As a resin, commercially available „Asiga“ „PlasGRAY“ was chosen. Micro forming was performed of SZ2080™ photopolymer with nonlinear laser lithography (NLL) system, which allows structures to be structured on a nanometer scale. DLP SLA is a 3D printing technology used for rapid prototyping purposes that is able to produce objects on a scale of mm, cm, or m with a resolution of a few tens of a micrometer. NLL is another 3D structuring technology that employs a nonlinear light-matter interaction mechanism and a sharply focused laser beam to produce objects on a nanometer scale. To fabricate multiscale structures, these two technologies were combined. The aim of this work is to fabricate multiscale objects via combination of DLP SLA and NLL. Firstly, in the experiments of this work, frames for the porous structure fabrication with NLL were printed using O3DP. Also, their dimensions were evaluated. Later, during NLL, the formations of the resolution bridges (RT) were performed, which helped to determine the suitable scanning speed v and average radiation powers P for further formations: v = 8 mm/s; P = 0.3-0.5 mW. Porous structure formations of 100 × 100 μm² area were further performed to determine the values of the distances between adjacent laser scans dₓᵧ and the distances between the two nearest layers h. The following values were selected: dₓᵧ = 10 μm; h = 0.5 μm. Finally, porous structure formations were made into already manufactured frames. It was observed that during the NLL formations, the grids were successfully formed, but after the development in a solvent, the detachment of the grids from the frame walls was observed. Nevertheless, most of the formed structures had retained the architecture. In summary, the results of this work have shown a successful combination of two O3DLs to produce multiscale structures, but improvements are needed in the selection of different resins and the selection of more accurate forming parameters.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Adomaitis, Martynas,
Contributors dc:contributor
  • Skliutas, Edvinas

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Adomaitis, Martynas,. Multiskalinių darinių formavimas kombinuojant vienfotonę ir daugiafotonę litografijas /. Institutional Repository of Vilnius University, 2021. https://repository.vu.lt/VU:ELABAETD107205455&prefLang=en_US