Back to search

Institutional Repository of Vilnius University

Skulptūrinių dangų pagrindu suformuotų elementų lazerinio grūdinimo tyrimas /

Abstract

dc:description

Optical components such as antireflective coatings, mirrors, filters are formed by depositing multilayer coatings by using various physical vapor deposition techniques. Antireflective coatings are used to remove Fresnel reflections from the displays, lenses or solar cells. Mirrors are used to manipulate light propagation in laser systems, filters – to distinguish desired light properties (polarization, wavelength). In this research object under investigation – dielectric Bregg mirror. Conventional approach for dielectric mirror formation is to utilize high and low refractive index dielectric materials. In terms of laser induced damage such coatings are limited by a high refractive index material (low band-gap). Glancing Angle Deposition (GLAD) technique may be used as a promising technology to avoid low band-gap material usage. By using this technology an optical component can be formed by depositing one high band-gap material which porosity and, correspondingly, the refractive index can be altered by changing the deposition angle between the substrate normal and the incident vapor flux. Highly reflective all-silica Bragg mirrors were produced using GLAD method. Dielectric mirror is formed by combining porous silica layers, deposited at 70 degrees angle, and it is considered as low refractive index layer, and dense silica, deposited at 0 degree angle, ¬- as high refractive index film. However, as the sample is placed in the air, ambient gasses and water molecules diffuse to the coating which result in coating degradation and reduction in resistance to laser radiation. During the course work laser induced damage of sculptured thin film based all-silica mirrors dependence on different environments were investigated. Perspective results were achieved but degradation was still observed. In this work ex-situ procedure is applied, which is called laser conditioning, in order to re-establish optical characteristics of the coating. All-silica mirrors were produced to achieve high reflectance at the wavelengths of 355 nm and 532 nm and laser conditioning have been tested: the laser fluence was increased at specific rate until damage is detected. The measurements were performed in nanosecond regime. The resistance to laser radiation increased from 44.06 J/cm2 (in case of nonetched substrate) and 57.80 J/cm2 (in case of etched substrate) irradiating the sample with 1 laser pulse per 1 test site (1-on-1) to 160 J/cm2 under 3rd harmonic Nd:YAG laser conditioning. Laser induced damage threshold of the mirror at 532 nm increased from 175 J/cm2 (1-on-1) to 300 J/cm2 when 2nd harmonic Nd:YAG laser conditioning was performed. Increase in resistance to laser radiation could be explained by ambient gas and water molecules movement out of the coating: as the fluence increases, the particles start to diffuse out of the laser irradiated sample space. However, further investigation is needed to explain this effect.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dolmantaitė, Gustė,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dolmantaitė, Gustė,. Skulptūrinių dangų pagrindu suformuotų elementų lazerinio grūdinimo tyrimas /. Institutional Repository of Vilnius University, 2023. https://repository.vu.lt/VU:ELABAETD158212020&prefLang=en_US