Back to search

Institutional Repository of Vilnius University

Optical and charge transport properties of perovskite layers with various stoichiometric defects /

Abstract

dc:description

Perovskites offer numerous desirable properties such as widely tunable photoluminescence color and material bandgap, achieved by composition and dimensionality engineering, high absorption coefficients, direct bandgaps, low exciton binding energies etc. They are also popular due to their cheap and simple fabrication from liquid phase with a promising possibility of film deposition on flexible large area substrates combined with roll-to-roll technology. Current record PCE of a perovskite solar cell is 25.7%, however due to low device stability and degradation in ambient conditions, perovskites have not yet reached mass market. In order to improve material properties, solvent engineering for defect reduction is employed, as well as previously mentioned compositional and dimensionality engineering methods. The goal of this work was to determine the influence of additives used during perovskite film fabrication on their optical and charge transfer properties, such as carrier lifetime, spectral position of absorption and emission bands, photoluminescence quantum yield, diffusion coefficient, diffusion length and ambipolar mobility. This was investigated by employing modelling of charge carrier dynamics, steady state absorbance, photoluminescence quantum yield, time resolved fluorescence and transient grating spectroscopy methods in a wide range of excitation densities. During this work it was found that Et3N, Et2NH and DIPEA amine additives in the perovskite cause a spectral blue shift of absorbance and luminescence bands in respect to the untreated sample, with Et2NH causing the biggest blue-shift, while PEAI additive induces a red-shift. An overall spectral displacement of 20 nm between the bands of different samples was found in the absorbance and stimulated emission spectra. Carrier lifetimes, extracted from TRPL kinetics, for blue-shifted samples had an order of magnitude lower lifetimes (170-370 ns) than for the red-shifted sample (2.16 µs). Moreover, obtained radiative recombination mechanism for Et3N and Et2NH samples was determined to be via shallow trap states, while for DIPEA and PEAI films – band-to-band transitions. From photoluminescence quantum yield dependencies on excitation fluence it was found that PEAI additive caused the highest photoluminescence efficiency and fastest trap filling amongst the samples, while Et3N resulted in lowest PLQY values. When SRH+ modelling was applied to these curves, extracted defect densities were highest for samples with DIPEA and Et3N additives and lowest for the perovskite containing PEAI. Measured diffusion coefficient of the samples increases with excitation fluence from 10-2-10-1 cm2/s up to several cm2/s, indicating that the charge carriers of the material are in a trap filling and de-trapping diffusion regime. Since carrier lifetimes, that reach several nanoseconds at maximum, decrease with increasing fluence, diffusion length does not depend on excitation density, with values in the order of magnitude of 10-1 µm. Lastly, ambipolar mobility increases in the same manner as diffusion coefficient and at high fluences obtains values in range of 101-102 cm2/Vs. Et2NH additive causes the highest diffusion parameters in the material, PEAI – the lowest. In conclusion, additives varied the material stoichiometry which in turn varied the defect density and their nature: high density of non-radiative recombination centers in Et3N and DIPEA samples caused the deterioration of optical and charge diffusion properties that these samples display; shallow trap states in Et2NH, from which carriers easily escape with increasing excitation density, explain the highest diffusion amongst the samples and mediocre luminescence properties; deep defect states of radiative nature in PEAI sample justify the long carrier lifetime and high PLQY values, and also the low diffusion parameters, caused by long carrier localization in the traps prior to de-trapping or recombination.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lipkevičiūtė, Samanta,

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
eng

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Lipkevičiūtė, Samanta,. Optical and charge transport properties of perovskite layers with various stoichiometric defects /. Institutional Repository of Vilnius University, 2023. https://repository.vu.lt/VU:ELABAETD158212097&prefLang=en_US