Institutional Repository of Vilnius University
Stimulated emission and optical gain in ingan structures /
Abstract
dc:descriptionInGaN ternary alloy semiconductors attract a lot of attention due to their successful solid-state lighting applications. Bandgap tunability by varying the amount of In in the compound or the width of the quantum well (QW) is one of the most appealing properties of InGaN structures, which made InGaN/GaN multiple quantum wells (MQWs) indispensable in the field of solid-state laser sources. However, alloys with high In content suffer from some growth issues such as large strain and defect formation due to differences in InN and GaN material properties, which, consequently, reduces efficiency of the device. Moreover, sample parameters influence the carrier localization conditions and built-in electric field in the structures. Such effects greatly influence the characteristics of laser diodes and complicate the analysis of radiative emission mechanisms in the InGaN structures. The main aim of this work is to study the influence of In content and/or QW width on the properties of stimulated emission (SE) in InGaN structures. Investigated samples had a different structure (MQWs or epilayers) and a different In content or the QW width. To evaluate and analyse the SE threshold in the samples, photoluminescence measurements were performed in a wide range of excitation power densities. Variable stripe length technique was used to evaluate the optical gain coefficients of MQW samples with different QW width. It was found that SE threshold for MQW structures decreases with In content up to 12% due to effective carrier localization, however, large In content leads to higher defect densities in the samples and results in high SE threshold. A similar tendency was observed for epilayer structures, however, the SE threshold started to increase at lower In content (12%) compared to MQW structures, indicating lower structural quality of epilayer structures. SE threshold was also found to depend on QW width. Larger QW width in high-In-content samples decreased the SE threshold, which was attributed to better electron wave function confinement in the QW. Moreover, the difference between the peak positions of SE emission and SP emission bands for MQW structures increased with In content in the sample. Such behavior was attributed to an increasing density of the band tail states. Optical gain coefficients obtained for MQW structures increase with QW width, which leads to lower SE thresholds for wider QWs.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Širvinskytė, Aleksandra,
Subjects
dc:subject × 1Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- eng
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD158213051&prefLang=en_US