Institutional Repository of Vilnius University
Electrical properties investigation of some oxyde ceramics /
Abstract
dc:descriptionElectrical properties investigation of some oxide ceramics Gustas Levickis Over the years a lot of efforts have been put into developing a lower operating temperature alternative to YSZ for use in SOFCs, as the high operating temperature creates a range of issues such as electrode sintering, catalyst poisoning, interfacial diffusion between electrolyte and electrode materials, thermal instability, the brittle nature of utilized materials, and the mechanical or thermal stresses arising from differing coefficients of thermal expansion. SOFCs require an electrolyte which is electron-impermeable and has a high oxygen ion conductivity. For this application the ceramics require a high conductivity at lower operating temperatures, and thus SDC, GDC and SGDC ceramics come in as attractive options, as they are reported to have higher conductivity than the other alternatives. The aim of this work was to investigate electrical conductivity of oxygen ion conductive ceramics and the influence of synthesis method and sintering conditions on the electrical conductivities of ceria-based ceramics. Results were obtained by impedance spectroscopy using the ammeter-voltmeter method and the fitting of the obtained data to an equivalent circuit based on the Bauerle brick layer model. From the data obtained the following conclusions could be made: The increase in sintering temperature from 1200°C to 1500°C in GDC and SGDC ceramics resulted in higher grain and total electrical conductivities. SDC ceramics with higher BET had higher electrical conductivity values when sintered at the same temperature. GDC-1400-2h-cp ceramic sintered from powder synthesised by coprecipitation had higher electrical conductivities than GDC-1400-2h-ssr ceramic sintered from powders synthesized by solid state reaction method. Overall highest electrical conductivities and lowest electrical activation energies at 500 K were found for GDC-1500-2h with activation energies for grain and total electrical conductivities being 0.71eV and 0.77eV respectively and values of grain and total electrical conductivities of 3.66 ∙ 10-3 Sm-1 and 2.15 ∙ 10-3 Sm-1 respectively.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Levickis, Gustas,
Subjects
dc:subject × 1Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- eng
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192067505&prefLang=en_US