Back to search

Institutional Repository of Vilnius University

Debris removal techniques for picosecond laser bottom-up milling of fused silica /

Abstract

dc:description

Micromachining is invaluable for state-of-the-art manufacturing technologies. To realize microstructure feature sizes in the range of sub-micron to tens of microns and aspect ratios of 0.1 up to more than 10 novel machining techniques are needed. High aspect ratios in channels serve to connect micro-components within microfluidic devices, supporting the necessity for the formation of channels from materials possessing excellent optical, isolation, and thermal properties. Materials like silicon and glass are therefore used, due to the mentioned properties and flexibility via different types of glass available. Produced channels and other parts have a wide range of applications, such as optical storage devices, micro-electro-mechanical-systems MEMS devices like piezoresistive pressure sensors, capillary nozzles, and others. Laser milling is preferred over other milling techniques because it allows the formation of high aspect ratio channels with high throughput. The laser beam can be focused into a spot smaller than any mechanical tool, and since lasers have no physical contact with the workpiece, they don't wear out. With the addition of nonlinear phenomena, the drawbacks of typical thermal processes, such as heat-affected zones and cracking can be mitigated. Longer laser wavelengths than UV, which is needed for direct ablation of fused silica, can be utilized to mill transparent media due to nonlinear phenomena. A large market provides lasers with around 1 µm wavelength and pulse duration from nanoseconds to femtoseconds. Wavelengths in the visible spectrum could be used via second or higher-order harmonic generation but at a loss to the power due to imperfect conversion of the crystals. The longer (ns) pulses typically provide higher throughput but at an increased heat-affected zone (HAZ) and rougher surface finish (Ra ~3 µm). Shorter picosecond pulses can enhance quality (Ra ~1 µm). Milling with a top-down technique produces walls with an angle and milling efficiency suffers due to plasma shielding. These effects can be mitigated using the bottom-up technique that allows for milled channels to have parallel walls and reduced plasma shielding since the debris does not go in the laser beam path. Consequently, higher aspect ratio channels can be formed using bottom-up machining. To form deeper channels debris has to be removed from the milling area. Therefore, additional debris removal methods, such as airflow or water, are employed which can also increase the milled depth. This work aimed to investigate channel milling using 1064 nm wavelength picosecond pulses focused on the rear side of the fused silica with additional debris removal methods.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kondratas, Aleksandras,

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
eng

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kondratas, Aleksandras,. Debris removal techniques for picosecond laser bottom-up milling of fused silica /. Institutional Repository of Vilnius University, 2024. https://repository.vu.lt/VU:ELABAETD192067516&prefLang=en_US