Institutional Repository of Vilnius University
Additive manufacturing using polyamide-12 /
Abstract
dc:descriptionSummary Laurynas Peciukonis ADDITIVE MANUFACTURING USING POLYAMIDE-12 Selective laser sintering even being quite an old additive manufacturing technology, remains quite expensive to this day, due to the higher complexity of the equipment construction than comparing it to other additive manufacturing variations. Main idea behind this work is to show that this technology can be accessed at a lower cost, thus aligning with the technology democratization idea. In order to simplify manufacturing mechanism NEJE N40630 blue light diode laser was used as a cheap alternative to the expensive high powered laser systems often used in other printers of this type. In order to solve beam ellipticity problem which occurs due to the nature of a diode laser an anamorphic prism pair is integrated into the system. Instead of a galvanometric based motion system an alternative motion system was created that utilizes stepper motors NEMA 17. After characterizing the laser system, it was determined that the output power of the laser is 1.08W and the ellipticity of the laser beam at the focal plane is quite high, 51.38%. Attempts to process Polyamide-12 showed a linear dependance between the laser induced damaged area size and the laser power. After testing other systems of the printer it was clear that the powder distribution system is capable of reliably coating the build plate with powder, however the heating system was not designed properly to allow for the heating chamber to reach desired 100˚C. While performing final print testing we couldn’t create a multilayer print as the first layer always moved while distributing the powder for the second layer. After visual inspection of the layer, it seemed to be warped, this was caused by different exposure on different areas of the layer. Even after failing to demonstrate multilayer printing ability, system’s testing showed that designed laser system is capable of processing Polyamide-12 and that lets to believe that this system is capable of increasing the availability of selective laser sintering printers.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Peciukonis, Laurynas,
Subjects
dc:subject × 1Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- eng
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192067659&prefLang=en_US