Back to search

Institutional Repository of Vilnius University

Katodoliuminescencija nitridininiuose junginiuose esančių defektų aplinkoje /

Abstract

dc:description

III-nitrides are attracting a lot of attention due to their unique properties. High chemical and thermal stability, high dielectric breakdown voltage, and a tunable bandgap allowing spectral coverage from IR to UV make them attractive materials for applications in the fields of microelectronics and optoelectronics[1]. Defects such as point defects (PD), dislocations and stacking faults (SF) decrease III-nitride quantum efficiency (QW) due to non-radiative recombination at these sites. Spectral width also increases due to additional energy levels created in a bandgap by PDs, which also degrades the desired performance of light emitting diodes (LEDs)[11]. Degradation of optical and electrical properties due to the density of defects in the material makes these sites a crucial area of investigation. The aim of this work was to examine the properties of cathodoluminescence around defects and to determine the correlation between cathodoluminescence mean intensity and peak wavelength in different III-nitride materials. The work was conducted using the combined technique of scanning electron microscopy and cathodoluminescence spectroscopy (SEM-CL), allowing to for the investigation of surface morphology and spectral features at different areas of the materials under investigation. For this, an Attolight Chronos SEM-CL microscope was used. Image analysis was conducted using Attomap software and Python code. The code was used to determine the correlation between CL intensity and the peak wavelength of the sample. It provides a linear approximation of CL intensity and peak wavelength data points and calculates Pearson’s coefficient (r), which shows the strength of correlation between two independent variables. The values of r vary from -1 to 1, where |1| means that the correlation is absolute. Analysis shows that in InGaN and AlGaN samples, dislocations and SF induce surface morphology changes, which in turn result in alloy or QW width fluctuations causing peak wavelength shifts. In InGaN, energy shift mainly occurs due to dislocation and SF induced V pits and trench defects. At these sites, CL intensity decreases and peak wavelength experiences a red shift due to an increase in In content and specifically in SF due to a larger QW width inside the loops created by trench defects[18, 20]. Sample S2 shows the increase in CL intensity within V defects, which could be the result of larger quantum barrier formation. QWs that grow on the inclined walls of V-pits have narrower widths due to a slower growth rate and smaller In content due to difficulty of incorporating In atoms in semi-polar planes, which are V-pit walls. This causes localization of carriers in In rich region around dislocation and promotes radiative recombination[18]. In AlGaN energy shifts occur due to step-terrace morphology formation, which is usually seen in samples with a slight miscut angle of the substrate crystalographic plane. Different growth rates and surface mobility cause Al and Ga atoms to segregate in different areas of these terrace formations. This causes bandgap changes and energy shifts[38]. It was also found that N-face GaNs show low or no correlation between CL intensity and peak wavelength, while Ga-face GaN shows a strong correlation. It might be due to the fewer point defects found in the Ga-face sample. Energy shifts in all samples can occur due to tensile and compressive strain region formation around dislocations, which causes larger atoms to segregate in the tensile parts of dislocations[21, 22]. It is determined that microdefects such as PDs and dislocations could not be the only contributors to the optical properties of the samples since a correlation between CL intensity and peak wavelength was not found in all examined samples.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mickūnaitė, Viktorija,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Mickūnaitė, Viktorija,. Katodoliuminescencija nitridininiuose junginiuose esančių defektų aplinkoje /. Institutional Repository of Vilnius University, 2023. https://repository.vu.lt/VU:ELABAETD192833298&prefLang=en_US