Back to search

Institutional Repository of Vilnius University

Organinių šviestukų su savitvarkiu skylių injekcijos monosluoksniu formavimas ir tyrimas /

Abstract

dc:description

The aim of this work was to produce OLEDs with a hole injecting self-assembling monolayer (SAM) and to study the effect this layer has on the characteristics of said OLEDs. Seven different organic LED structures have been manufactured employing the use of four different SAMs. All of the fore-mentioned OLEDs used the same emitter, electron injection and electron transportation layers. These organic light-emitting diodes were characterized with volt-ampere characteristic (VACH), volt-candela characteristic and external quantum efficiency (EQE) dependence on luminance. When employing the use of 4-PACz, 2-PACz and MeO-4PACz (as opposed to PEDOT:PSS hole injection layer), with PVK hole transport layer, OLEDs showed a few key changes in their characteristics. First was a significant loss in luminance across 4-15V range, OLEDs manufactured with a SAM hole injection layer showed a reduction of about half in comparison to OLEDs, that used PEDOT:PSS instead. Second noteworthy loss was a decrease in OLED stability and lifetime. OLEDs with self-assembling monolayers had a characteristic curve down in EQE when exposed to voltages of more than 10V, which shows their low lifetime and high rate of degradation. Also, many of the OLED pixels blinked out almost instantly, which shows their low level of stability. This problem was most prevalent in pixels with higher emitting surface area. It was determined that for that specific structure MeO-4PACz was least detrimental to the performance OLEDs, since its degradation was the slowest. Second structure group that has been manufactured is TAPC/TCTA with MeO-4PACz (full structure – MeO-4PACz/TAPC/TCTA/DMeCzIPN:mCP/DPEPO/TmPyPB). The first structure used all of the mentioned layers, second one did not use TPAC, third was formed without MeO-4PACz monolayer. Structures using the monolayer showed some positive and some negative effects. Firstly, the voltage at which OLEDs turned on was reduced from about 4,25V to about 3,5V. Secondly, luminance in at some voltages was greatly increased when compared to OLEDs that did not use SAMs. Thirdly, lifetime and stability of organic LEDs were significantly decreased when using SAMs. Organiniai šviestukai, OLED, SAM, savitvarkiai monosluoksniai.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dovydėnas, Otas,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dovydėnas, Otas,. Organinių šviestukų su savitvarkiu skylių injekcijos monosluoksniu formavimas ir tyrimas /. Institutional Repository of Vilnius University, 2023. https://repository.vu.lt/VU:ELABAETD192833402&prefLang=en_US