Back to search

Institutional Repository of Vilnius University

Medžiagos dalelių dydžio įtaka 3D spausdinimo būdu pagamintų metalinių struktūrų kokybei /

Abstract

dc:description

The aim of this work is to separate 17-4 PH stainless steel powder particles into different size fractions and to evaluate the influence of particle size on the mechanical characteristics of 3D printed alloys. Powder-based additive manufacturing is a group of additive manufacturing processes where successive layers of powder are sintered by laser melting, allowing the creation of parts with complex geometries. In addition to the manufacturing process parameters, it is important to consider the choice of powder material to ensure the best possible printing results. Some of the most important requirements for the powder material are regular, spherical geometry and particle size. This is important because the particles need to be small enough to be quickly sintered and melted when the laser energy beam is applied, but free flowing enough to avoid inconsistent flow and effects on the working speed. To ensure the most uniform formation of the metal alloy by 3D printing, it is necessary to consider the influence of the particle size of the material on the mechanical properties. In this work, the samples are divided into different size fractions. A vibratory separator is used to separate the 17-4 PH material sample. With the resulting size fractions, cubes are printed using different metal printer settings. The influence of the different material sizes and printing parameters is evaluated by analyzing the mechanical properties: density, hardness, and surface roughness measurements. A high-precision analytical balance, an optical profilometer and a hardness tester were used for the measurements. From the SEM images, we found that the particles are spherical, with a regular shape and suitable for use in 3D printing. The separation of the 17-4 PH stainless steel powder particles into different fractions (0–40 μm, 40–63 μm and 0–63 μm) revealed particle size discrepancies in the range of 1–1,5 μm, which could be due to non-spherical elongated particles in the material, mechanical damage to the sieves or the separation time being too short. The 3D printing of samples from the prepared powders at different energy densities showed that for all three powder blends the best values for density, hardness and surface roughness were achieved in the energy density range from 65 J/mm3 to 75 J/mm3. We also found that the alloy printed from a material with a particle size distribution of 0–40 μm has the best properties, while the alloy printed from a material with a particle size distribution of 40–63 μm has the worst.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Petkus, Ričardas,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Petkus, Ričardas,. Medžiagos dalelių dydžio įtaka 3D spausdinimo būdu pagamintų metalinių struktūrų kokybei /. Institutional Repository of Vilnius University, 2023. https://repository.vu.lt/VU:ELABAETD192833621&prefLang=en_US