Back to search

Institutional Repository of Vilnius University

Kabelių su d-sub tipo jungtimis tikrinimo įtaiso projektavimas, modeliavimas ir tyrimas /

Abstract

dc:description

The purpose of my bachelor thesis was to design a cable tester, which could perform tests on connections between the cores of the cable and connectors. The device is designed to test cables with D-subminiature type electrical connectors and can examine cables with DB-25, DA-26, DA-15, DE-15 and DE-9 connectors. PCB is created to detect voltage drops due to the increased resistance of the cable. Voltage drops could be measured with Arduino Mega microcontrollers. Microcontrollers are programmed with C++ programming language and mutual communication between microcontrollers is assured by using UART protocol. As a result, the cable tester was built that can examine and interpret data from microcontrollers analog inputs by having reference values for different cables. Classic multimeters use very low current for connection testing, on the other hand, the designed cable tester uses high current to test the quality of the cable connections. These tests reduce the risk of using damaged or poor-quality cables. After constructing and analyzing the cable testing device, it was found that: • The tester can test 18-28 AWG wire cables. • Cable impedance consists of wire impedance, contact impedance and connector impedance. Resistance can depend on the wires used, solder and contact materials, temperature, cross-sectional area and length of the wire. • You cannot rely on the data obtained during “NI Multisim” simulation. The data obtained during the simulation is only a guideline, as the resistance of the contacts is not included in the calculations. • The resistance distribution of the test cables is in the milliohm range (when testing with cables no longer than 3 meters), but cables with poorly soldered connections can have orders of magnitude higher resistance.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Toliušytė, Urtė,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Toliušytė, Urtė,. Kabelių su d-sub tipo jungtimis tikrinimo įtaiso projektavimas, modeliavimas ir tyrimas /. Institutional Repository of Vilnius University, 2023. https://repository.vu.lt/VU:ELABAETD192833762&prefLang=en_US