Back to search

Institutional Repository of Vilnius University

Naši lazerinė abliacija liejimo formų gamybai ultratrumpųjų impulsų papliūpomis /

Abstract

dc:description

Currently, the most significant requirements of industry companies are rapid ablation rate and high quality of the processed surface. Therefore, the interest of research is focused on material processing with ultrashort pulse bursts. For ablation using pico- or femtosecond pulses, the material is removed so quickly that the heat does not have time to spread to the surroundings, which leads to better surface quality. A sequence of several pulses, called bursts, makes it possible to efficiently use excess laser energy that would be wasted on heating the material in the case of a single pulse. Because of the high repetition rate and the effect on the surface temperature, using the burst mode produces surfaces with improved smoothness. The literature review provides the most important information that is needed to understand the working principles of ablation and the importance of pulse duration and the number of pulses in the bursts. In this research work, experimental measurements were made, during which the goal was to find a set of laser parameters for the most efficient mould production. When using a 160 mm focal length focusing lens, it was not possible to achieve the optimal energy fluence, so experiments were carried out with a 100 mm focal length lens. By changing the repetition rate of pulses and the number of intra-burst pulses, the dependence of the ablation efficiency on the energy fluence was studied for different metals: aluminum, copper, and stainless steel. A set of optimal processing parameters for aluminum was determined by focusing the beam with a 100 mm focal length F-theta lens, 0,39 MHz repetition rate, and 3 pulses per burst. Using these parameters, an ablation efficiency of 6,1 μm3/μJ and an ablation rate of 7,2 mm3/min was achieved. The study of the refractive index of the PDMS was performed. According to measurements of refractive index, Fresnel lens was modelled. With the optimal parameters found for efficient laser irradiation, the Fresnel lens mould was ablated. After moulding the lens, tests were performed to check if the lens was able to focus the light as modelled.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gudauskytė, Ugnė,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Gudauskytė, Ugnė,. Naši lazerinė abliacija liejimo formų gamybai ultratrumpųjų impulsų papliūpomis /. Institutional Repository of Vilnius University, 2023. https://repository.vu.lt/VU:ELABAETD192834368&prefLang=en_US