Back to search

Institutional Repository of Vilnius University

Sudėties ir padėklo prigimties įtaka La:SrSnO3 sluoksnių savybėms /

Abstract

dc:description

In this work, lanthanum-doped SrSnO3 (LSSO) layers were formed on different substrates by pulsed injection MOCVD. By varying the precursor composition in a solution, LSSO layers of different compositions were deposited and the impact of the Sn/Sr ratio on the electrical properties of the LSSO layer at low partial pressure of oxygen were evaluated. It was also aimed to investigate the influence of the crystalline lattice mismatch between the perovskite type (LaAlO3, YAlO3, SrTiO3, La0.18Sr0.82Al0.59Ta0.41O3 ) substrates and LSSO on the charge carrier mobility. The LSSO layer elemental composition was evaluated on LAO, YAO and Sapphire C substrates by X-ray energy dispersive spectroscopy (EDS). The crystal structure features were investigated by X-ray diffraction (XRD) in two configurations: Bragg-Brentano and Schultz geometries. The surface morphology analysis was carried out by scanning electron microscopy (SEM). The charge carrier concentration, mobility and specific resistance were measured using Hall effect measurement equipment. The results showed that the grown La:SrSnO3 layers regardless of the substrates were epitaxial and contained a small fraction of impurity phase. The electrical properties of the LSSO layers were found to be dependent on the layer composition. Since the obtained Sn/Sr ratio varied in the range of 0.95 to 0.97, the origin of identified impurities were possibly related to the formation of the Ruddlesden-Popper (RP) phase. On the other hand, the large EDS method’s uncertainty did not allow to determine a clear relationship between charge carrier mobility and the composition of the layers. Given the large dispersion of the charge carriers mobility results within a narrow range of Sn/Sr ratios, it was assumed that other factors were involved. No correlation between lattice parameter, surface morphology and charge carrier mobility was suggested by the results. However, it was determined that the crystallite alignment parallel to the substrate plane had a greater influence on the charge mobility values in the layers than perpendicular. The calculation of the pseudocubic crystal lattice parameter values of the layers showed the following sequence: LSSO//YAO < LSSO//LAO < LSSO//LSAT < LSSO//STO < LSSO. The slight variation of the lattice parameter with respect to the substrate was possibly indicative of the presence of stresses in the thick layers, although stresses did not affect the mobility of the charge carriers.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rudaitytė, Gustė,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Rudaitytė, Gustė,. Sudėties ir padėklo prigimties įtaka La:SrSnO3 sluoksnių savybėms /. Institutional Repository of Vilnius University, 2023. https://repository.vu.lt/VU:ELABAETD192839069&prefLang=en_US