Institutional Repository of Vilnius University
Lignoceliuliozės frakcionavimo chemo-fermentiniu metodu tyrimas /
Abstract
dc:descriptionEmerging environmental issues and increasing demand for the fuel, chemicals, and energy have motivated the scientific community to search for new sources of renewable organic materials. Lignocellulose is one of the most abundant biomass resources on Earth. More than 80% of lignocellulose is comprised of three biopolymers: lignin (15-30%), hemicellulose (10-30%), and cellulose (30-50%), from which higher value-added products could be obtained. However, to establish a commercially viable biomass refining process, proper pre-treatment and fractionation methods are needed for the lignocellulose biomass. The aim of this research was to develop a new chemo-enzymatic lignocellulosic biomass fractionation system using Deep Eutectic Solvents (DES). DES have attracted the attention of the scientific community due to their ability to process and selectively dissolve biomass components. Three types of choline chloride (ChCl) based DES were successfully synthesized with urea (U), lactic acid (LA), and citric acid (CA). The physical properties (viscosity, conductivity, density) of the synthesised DES were measured. The selection of commercially available enzymes was performed based on cellulosic activity. The Novozymes® Promozyme D2 enzyme exhibited the highest cellulosic activity (151,9 ± 15,2 U ml-1), therefore its stability analysis was conducted in two DES: ChCl:U and ChCl:LA. It was observed that the stability of Promozyme D2 remained high in both DES for the first 5 hours at 20 °C, 40 °C and 60 °C incubation temperatures. Preliminary optimal conditions for biomass processing and biocatalysis were obtained, which were applied in the investigation of three methods of lignocellulose fractionation. It was observed that in all cases the mass percentage of hemicellulose in biomass decreased, cellulose increased, and lignin varied. It was confirmed that DES is a promising technology; however, it was made clear it requires further investigation with different DES, enzymes, and lignocellulosic sources, as well as testing other processing parameters such as mixing and pressure to obtain clean cellulose, hemicellulose, and lignin fractions from lignocellulosic biomass in environmentally friendly way.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Paulauskaitė, Monika,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192839080&prefLang=en_US