Institutional Repository of Vilnius University
Aukšto dažnio sinchroninės detekcijos schema netiesinei optinei mikroskopijai panaudojant programuojamų loginių elementų masyvų integrines grandines /
Abstract
dc:descriptionLock-in amplifier – is an amplifier that can measure and extract faint signals from noisy environments or large signals over a wide dynamic range. High resolution is achieved due to its main principle – homodyne detection. Device under test is modulated at a known reference frequency via optical, electrical, or other type of signal. Its response is detected and transmitted as an electrical signal to one of lock-in amplifiers inputs where it is mixed with a reference signal. Mixed signal is filtered using a low-pass filter and the resulting value is a DC component which is directly proportional to the measured signal amplitude. The aim of this work is to design an FPGA-Based High Frequency Lock-in Detection System for Nonlinear Optical Microscopy. In this work a simulation of a lock-in amplifier was created and tested. The simulated design, by using VHDL hardware description language, was implemented, synthesized, and tested with a hardware description language simulation environment. Synthesized design was uploaded to DE0-Nano (Altera Cyclone IV EP4CE22F17C6N FPGA) development board and tested, by measuring its timing values and data output. Data output rates of up to 5MHz were achieved.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Stasiūnas, Rytis,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192959988&prefLang=en_US