Institutional Repository of Vilnius University
Fosforinių šviesos keitiklių skirtingų terpių šiluminio laidumo tyrimai /
Abstract
dc:descriptionLaser-based luminaires for high-power lighting are increasingly used in the lighting technology market. A blue laser diode is usually combined with phosphor based light converter to produce white light. Phosphor light converters must have good thermal properties because they lose their optical properties when heated due to the high power of the laser diode. The aim of this work is to create a warm white light source by combining two-colour phosphorus and improving its thermal properties by adding hexagonal boron nitride to the composite. The aim of this work was to investigate the effect of boron nitride impurities on the thermal properties and stability of light parameters of a phosphor based light converter. In this work, series of samples with different boron nitride concentrations in phosphoric light converters were prepared. In order to determine as accurately as possible, the change in the thermal conductivity coefficient due to the addition of boron nitride, the first part of the work focused on the optimization of the thermal conductivity measurement method. To reduce measurement inaccuracies in the thermal imaging camera, emission coefficients were determined for all samples. The optimal concentration of two phosphorus in the production of a warm white light source was selected during the work. Subsequently, the changes in the thermal conductivity of all the produced samples were investigated. The stability of light parameters by excitation of a changing power of a laser diode in a phosphor based light converter was evaluated. During the work, it was found that the addition of two-colour phosphorus with a 20 percent of hexagonal boron nitride to the supporting medium – silicone, increases the thermal conductivity of the phosphoric based light converter up to 5 times. It has also been observed that the amount of boron nitride in the sample causes a slight decrease in the emission coefficient, which may affect the inaccuracies in the thermal conductivity measurement. The incorporation of thermally conductive impurities into the phosphor light converter results in better stability of the light parameters and allows to achieve a higher light intensity.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Matulis, Lukas,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192970821&prefLang=en_US