Back to search

Institutional Repository of Vilnius University

Investigation of the effect of photosensitization on laser 3d polymerization /

Abstract

dc:description

Growing demand for micro-scale structures in various science application fields require excessive research of the materials used in photopolymerization fabrication. Wide range of commercially available prepolymers and photoinitiators (PIs) result in broad range of combinations of polymer resins, which can be used with even broader choice of laser systems with varying parameters. For this reason, most efficient settings for micro-scale fabrication has to be determined, not to waste time on experimenting with unknown materials, trying to understand occurring processes, and to be able to choose already tested instruments and mixtures. To contribute to researching various commercially available polymers, this work goal is to determine the dependence of photopolymerization and optical damage thresholds on four different PIs (BAPO, IRG369, TPO, DEABP) mixed with SZ2080TM prepolymer with 0.5 % and 1 % concentrations at two different wavelengths (515 and 1030 nm). The experiment was done by mixing samples with four different photoinitiators and conducting laser micro-fabrication, until both optical polymerization and damage thresholds were found. Samples were developed by critical point drying (CPD) machine and later analyzed by taking images with scanning electron microscope (SEM). Found thersholds were calculated as intensities and they later allowed dynamic fabrication window (DFW) calculations, for further analysis. During the experiment, it was found, that 515 nm wavelength appeared to be more efficient than 1030 nm, since latter required more intense light to polymerize material. Also, different absorption phenomenas were observed with different PIs at varying wavelengths: BAPO, IRG369 and TPO seemed to point to two-photon absorption (2PA) at 515 nm and samples fabricated at 1030 nm showed multi-photon absorption (MPA) (in this work, it coresponds to when more than two photons were absorbed simultaneously). DEABP pointed to single-photon absorption (1PA) at 515 nm, due to its high absorbance spectra in this region, and at 1030 nm - to MPA. Concentration variations showed correspondence to appearing absorbance phenomenas, since with 2PA concentrations clearly altered DFW, while with MPA almost no clear difference was observed with change of concentration. Different PI behaviors, mixed with varying concentrations at 515 nm and 1030 wavelength were demonstrated. It offers clearer understanding of used PIs performances with different wavelengths for future applications.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sebestinaitė, Laura,

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
eng

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Sebestinaitė, Laura,. Investigation of the effect of photosensitization on laser 3d polymerization /. Institutional Repository of Vilnius University, 2022. https://repository.vu.lt/VU:ELABAETD192970872&prefLang=en_US