Institutional Repository of Vilnius University
Daugiasluoksnių 3D mikro-porėtų darinių formavimo dvi-fotone polimerizacija tyrimas /
Abstract
dc:descriptionStereolithography is one of the most promising technologies in the field of laser physics. Using certain equipment when the laser beam is a sharply focused and a high light intensity is obtained in some localized spot the polymerized material there have an increasing probability of nonlinear light phenomena. A branch of this technology,where the main mechanicms is nonlinear absorption – two-photon lithography. This technology can achieve a very high resolution of < 100nm scale and is widely used in the fields of micro-optics, telecommunications, tissue engineering and metamaterials. With the rapidly expanding application possibilities, there is a necessitate to have larger structures with precise detail dimensions at the microscopic level. The aim of the work is to evaluate how the dimensions of the formed voxel changes from the formation parameters at different depths of SZ2080TM polymer. Before practise part of the study, using „3Dpoli“ program 3 codes were written for the Resolution Bridges (RB) method architectures, which were tested to collect the voxel dimension values. The formation of polymerized structures was performed using 515 nm (fundamental 1030 nm) femtosecond laser radiation with a high pulse repetition frequency (200 kHz). By varying the laser power P, the velocity v of the positioning tables and the depth of line formation, the most efficient architecture of the RB method was selected and the dimensions of the lines formed at different polymer depths were collected using it. The obtained data showed that as the depth of formation in the polymer increased, the lateral dimensions dxy decreased, and the longitudinal dimensions dz was increasing until some point and after that began to decrease. The obtained trends were compared with other studies of this type founded in the literature. In the obtained graphs, it was observed that the dimensional change was larger in the formations with intensively located closer to the polymer threshold: dxy changed 51.2% and dz changed 27%. After evaluating the dimensional change of the voxel, multilayer microporous structures were polymerizated. It was observed that the most sustainable and accurate dimensional structures were expressed in terms of intensity in the middle of the dynamic formation window. Finally, a microporous structure was formed with 371 μm in height, 62 layers, 5 μm hatching in the XY plane, and 4% apex narrowing.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Ulevičius, Salvijus,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192970892&prefLang=en_US