Institutional Repository of Vilnius University
III grupės nitridinių šviestukų elektrinių kontaktų tyrimas /
Abstract
dc:descriptionGaN is a binary III/V direct bandgap semiconductor used in electronic and photonic devices such as light-emitting diodes (LED) and high electron mobility transistors (HEMT). The material is one of the main candidates to replace currently dominant silicon-based technologies. Currently, GaN technology faces several problems. One of the main problems is the high resistance of LED contacts. That is due potential charge barrier apparent within the metal - semiconductor junction. From classical Schottky theory, it is thought that the potential barrier of metal - semiconductor junction depends only on the metal's work function. However, recent researches have shown that this is not the case. Other important factors were shown to be significant contributors, such as carrier concentration of the semiconductor and various defects in the formation of the metal - semiconductor junction. Uneven surface morphology can also lead to faulty mechanical contact with heavily increased resistance and uneven current. The main concern of this research is to perform InGaN LED IV analysis and compare it to newly formed contacts. It is also required to study the effects on the physical properties of an electric contact when a formation is done with the following metals: Ti, Ni, Al, Au in order to avoid future mistakes in creating such devices. After completing the IV analysis of various LEDs, it was found that the resistance of n-type contact is higher than the one of p-GaN. This result disagrees with most of the other experiments as the p-type contact is expected to be less effective. This may be caused by imperfections in the fabrication of such n-type contact. To investigate the issue, 2 electrical contact structures were formed. One for analyzing the surface of metals within the contacts, and another for measuring IV characteristics for such devices. The research on different contact-forming metals showed that Ti and Al layers are the cause of the rough and uneven surface structure of the n-type contact. This may come from the fact that these metals have low surface energy and the hexagonal crystal structure of Ti. This result could lead to reduced efficiency of the LED and needs to be considered whenever future fabrications are designed. Thermal annealing of the made contacts was performed. It was studied that on the contact's surface the metals formed different alloys and distributed themselves irregularly. This distribution of chemical elements was more uniform in the n-type contact than in the p-type contact. From the newly formed electric contact IVs, it was found that the specific contact resistivity is very similar to those demonstrated in other experiments. It was concluded, that if such parameters were used for manufacturing LEDs, the overall resistance of the device would be reduced by a factor of 10 compared to the ones investigated prior.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Razas, Kristupas,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192973116&prefLang=en_US