Institutional Repository of Vilnius University
Skirtingos galios raudonos ir mėlynos spalvos šviesos diodų žemadažnio triukšmo tyrimas /
Abstract
dc:descriptionLow-Frequency Noise Investigation of Red and Blue LEDs of Different Power Justinas Abrutis Summary A light emitting diode (LED) is a semiconductor light source that emits light when current is flowing through it. The electrons in the semiconductor recombine with the electron holes releasing energy in the form of photons. In many applications of LEDs their reliability is very important. Low-frequency noise analysis of light-emitting diodes not only provides information about the diode's own noise but also allows the analysis of certain physical processes taking place in it. The aim of this work is to investigate the voltamperic characteristics of a light emitting diodes, analyze electrical and optical noises to evaluate their reliability and characteristics of light emitting diodes noise and investigate the correlation coefficients. The changes in all characteristics after aging of the samples were also compared. In this research optical and electrical noise signals were measured in the frequency range of 10 Hz to 20 kHz and changing input current from 0.41 mA for blue LED and from 0.45 mA for red LED. Also correlation coefficient modeling and analysis between optical and electrical fluctuations were performed. From the voltamperic characteristics it was found that in the light emitting diodes is mostly affected by diffusion and generation-recombination currents. Investigated blue and red light emitting diodes are distinguished by mostly 1/f-type optical and electrical fluctuations with optical noise transforming into shot noise at higher frequencies. Origin of 1/f noise is a superposition of many generation-recombination processes with their relaxation time spread over a very wide range, through centers formed by diode defects. Defective LED areas were determined from the correlation coefficients and their variation. The diodes were also aged for 1752 hours at room temperature allowing a constant current of 300mA. The characteristics of LEDs before and after aging were compared. After aging the change in characteristics of the blue LED were negligible, but for the red LED the change in its characteristics were already observed after the first stage of aging.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Abrutis, Justinas,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192973154&prefLang=en_US