Institutional Repository of Vilnius University
Difrakcinių optinių elementų modeliavimas efektyviam pluošto formavimui /
Abstract
dc:descriptionThe micro-processing of materials is one of the most widely used fields in research and industry. One of the most commonly used tools to achieve high-quality results in micro-processing is ultrashort-pulsed solid state lasers. Such lasers have a gaussian intensity distribution, and after one pulse, the response of the material is also gaussian, that results with an oval pit, ablated on the material surface. For processing large areas of material's surface, those pulses need to be overlapped. As a result, the surface gets rough, and the edges of the pit have a slope. In order to achieve smaller surface roughness values more homogeneous, rectangular intensity distribution is needed. Also, in order to increase the fabrication speed, microstructuring can be performed with several beams instead of one. Manipulation of the laser radiation intensity distribution is enabled by diffractive optical elements, which due to the diffraction phenomenon can change the shape of the laser beam or split it into several beams of equal intensity. The quality of such elements is described by the conversion efficiency, which is a parameter that shows how much of the incoming radiation has diffracted into the desired output field. This paper describes the modeling results of the phase mask, which produce the flat top intensity distribution. Ir was generated by the "VirtualLab" software package, which uses the iterative Fourier transform algorithm. The parameters of these elements have been optimized and selected. With a conversion efficiency of 83 precent, an optimal flat top phase distribution was discovered. Also, the highest quality phase distributions were found, which corresponded to the production possibilities with a conversion efficiency of 76 percent. In the result, we found that by increasing the number of phase levels, efficiency increases and then saturates at the 7 phase levels. Each aditional phase level (for > 7) would increase the conversion efficiency by only 1 percent. Theoretical model was verified using spatial light modulator. In the result beam isn't converted effectivly. But theorical model was near to the experimental one when beam is out of focus.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Stonytė, Evelina,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192974125&prefLang=en_US