Institutional Repository of Vilnius University
Aplinkos energijos kaupimo metodų analizė /
Abstract
dc:descriptionIn this paper, written by Lukas Krivickas, as it goes by the title, an analysis of ambient energy harvesting methods is presented. The goal of this work was to construct an RF harvester and test its capabilities. RF harvester collects energy of ambient radio waves and turns them into DC voltage, suitable for feeding various IOT devices, which require low amounts of energy. RF harvester consists of 4 main parts: antenna, impedance matching network, rectifier/voltage multiplier circuit and power management unit. In this work, an 2x2 rectangular inset feed microstrip patch antenna array was designed for 2.4 GHz frequency band which is used by “Bluetooth” and “Wi-Fi” technologies. Inset feed technique guarantees higher bandwidth and lower return loss and an array was chosen instead of single antenna due to higher aperture. Impedance matching network matches the impedance of antenna to impedance of load. Impedance matching is important as it reduces the reflection coefficient of antenna. In this work, the circuit was not produced due to lack of time. For rectifying purposes, a 3-stage Dickson voltage multiplier topology with SMS7630-005LF Schottky diodes was chosen. Voltage multiplier topology not only rectifies input RF signal but also boosts voltage at the output. This is accomplished by stacking Dickson voltage multiplier circuit in series. Boosting voltage is essential as it increases the sensitivity of RF harvester. IC “BQ25570” was used as power management unit, as it has low voltage requirements for both cold start (330 mV) and standard operating conditions (120 mV) and also consists of MPPT (Maximum Power Point Tracking) which optimizes the load of rectifier circuit. The final result is working RF harvester with sensitivity of –8.32 dBm and stable 1.8 V output voltage, suitable for feeding IOT devices. However, further optimizations need to be done in order to improve the sensitivity of RF harvester: antenna array needs to be designed according to the limitations of the manufacturing process and impedance matching network would also help reducing the loss caused by impedance mismatch.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Krivickas, Lukas,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192974374&prefLang=en_US