Institutional Repository of Vilnius University
Mikroelektromechaninės inercinės navigacijos sistemos tikslumo tyrimas /
Abstract
dc:descriptionAs the modern micromachining techniques are improving, it becomes more and more viable to use sensors manufactured by MEMS technology in areas where precision is crucial. An example of such an area is navigation based on inertial measurement units (IMUs). Due to their unique and desirable qualities, such as miniature size, weight and cost, MEMS IMUs application for motion tracking is already achieved in almost all modern smart devices. However, their signal is still prone to higher errors and in areas requiring high signal-to-noise ratio (such as inertial navigation due to the dead-reckoning integration) in sensor data for obtaining the trajectory the potential for use of these sensors is still being researched. The goal of this thesis is the evaluation of precision of an inertial navigation system, comprised of three perpendicularly mounted LSM6DS3 inertial measurement units. It is done by evaluating the effect that the noise present in sensor data has on the restoration of the trajectory. Firstly, in order to make sure the written algorithm for trajectory estimation is accurate enough, the trajectory restored from an ideal, i. e. noiseless INS measurement data was compared to the actual trajectory. The complicated trajectory was restored with satisfiable accuracy. Errors in restored trajectory are associated with the use of numerical integration methods. After confirming the satisfactory precision of written algorithm, the measurement data of an INS with noise equivalent to that of the INS being evaluated was used to recover the same trajectory. It was found out that such an INS is not suitable for navigation as the noise in the sensor data leads to rapid accumulation of errors in trajectory estimation due to double integration which leads to unrecognizable distortion of estimated trajectory. Further analysis found that an INS with ten times lower noise would be suitable. It was confirmed that the limiting factor for the precision of trajectory restoration is the precision of a gyroscope. It is proposed that, in order to use cheap MEMS INS of the current technology, it must be fused together with other sensor data, such as a magnetometer or satellite navigation. As the MEMS manufacturing technology advances, it is reasonable to expect the wide adoption of accelerometer-and-gyroscope-only MEMS INS in the near future.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Povilaitis, Marius,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD192974473&prefLang=en_US