Back to search

Institutional Repository of Vilnius University

Kietiklio kiekio įtaka antikorozinių epoksidinių dangų savybėms /

Abstract

dc:description

Anticorrosive epoxy coatings are one of the most efficient and durable solution for protecting metal surfaces from corrosion and providing proper long-lasting appearance. While formulating coating compositions it is particularly important to properly select the ratio of epoxy resins and hardener as well as use special additives. Proper selection of components can control the elasticity, hardness, glass transition temperature, mechanical, thermal and chemical properties of the coatings. The aim of this graduation thesis was to investigate the influence of quantity of hardener on various properties of epoxy coatings. Structure of coatings was proven by FTIR spectra. It was determined that epoxy ring peak disappears completely in cured coatings. It was estimated, that better thixotropic properties was observed when hydrophobic additive was used for coating formulation. The influence of ratio of epoxy:amine used for formulation on profile of rheological curves was negligble. Compositions where excess of epoxy resins were used showed a slightly higher viscosity. During DSC analysis it was determined, that the glass transition temperature of the prepared coatings ranged from 57.5 ℃ to 61.9 ℃. The lowest Tg was obtained in coatings cured with amines without using catalyst. These coatings were the most elastic and impact resistant. Mechanical properties of coatings like hardness, impact and abrasion resistance, adhesion to substrate were investigated. The highest adhesion to the substrate (41.64 MPa) was observed for the coating that was cured with mixture of liquid amine containing accelerator, where [epoxy:amine] was 1:1.1. Good adhesion result (39.22 MPa) was achieved for the coating that was cured using the mixture of liquid amines with the high content of polyamide amine, where [epoxides: amines] was 1: 0.9. The better anti-sagging properties of coatings were obtained for coatings containing surface tension reducing agents and thickener (modified clay). The best impact resistance was indicated on coatings containing mixture of liquid amines without special additives.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kulbokaitė, Rūta,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Kulbokaitė, Rūta,. Kietiklio kiekio įtaka antikorozinių epoksidinių dangų savybėms /. Institutional Repository of Vilnius University, 2020. https://repository.vu.lt/VU:ELABAETD193302094&prefLang=en_US