Institutional Repository of Vilnius University
Bipolimeriniai mikrodariniai stiklo kanaluose, realizuoti trimatės lazerinės litografijos metodu /
Abstract
dc:descriptionThree-dimensional laser lithography (3DLL), based on multiphoton absorption in the polymer precursor volume, enables the formation of three-dimensional polymeric microstructures from various polymeric materials. Elements made using this method can have high spatial resolution and high production accuracy. Since it is possible to form precise microelements even from several different polymer precursors, capable of bending duo to material-solvent interaction (swelling or shrinking), 3DLL is ideal for the production of bipolymeric structures. During this experimental work, two polymeric substances were used to form bipolymeric microstructures in glass channels: SZ2080 and PEG-DA-575, both photosensitized by adding 1% of photoinitiator Irgacure 369. By changing the laser output power and the number of translation times samples with bipolymeric walls were formed. These structures were exposed to five different solvents and monitored. To determine the magnitude of the deformations, the angle of bending Δα was calculated for each solvent. The results showed that the angle of bending depends on the solvent to which the bipolymeric structure is exposed. Changing the formation parameters also changes the size of this angle and the amplitude of the deformation. Deformations in these structures result from the different behaviour of materials in solvents and interaction between them. The change of formation parameters also changes the force of interaction between walls made of different polymer precursors. The maximum amplitude of the bend angle is 49° degrees. It has been observed that the amount of bends does not have a significant effect on the properties of bipolymeric microstructures: during the cycles of substitution of different liquids in the same solvents, the change in the size of the bend angle varies within 3° degrees. During this work, bipolimeric structures were fabricated and realized in glass channels. These samples could be used as microvalves or as fluid sensors. It has been observed that after the structures dry for the first time in air, the angle of bending changes for part of the samples after one week. Further investigating these changes reveals that measured values after three weeks are equal to the values measured after one week past the fabrication of samples.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Tamulaitis, Emantas,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD193351919&prefLang=en_US