Institutional Repository of Vilnius University
Bi(CrxFe1-x)ySc1-yO3 perovskitų dielektrinė spektroskopija /
Abstract
dc:descriptionMultiferroics are materials in which two or all three of the properties, namely ferroelectricity, ferromagnetism, and ferroelasticity occur in the same phase. This means that they have a spontaneous magnetization that can be reoriented by an applied magnetic field, a spontaneous polarization that can be reoriented by an applied electric field, and a spontaneous deformation that can be reoriented by an applied stress [14]. The recent interest in magnetoelectric materials has been stimulated by their great potential for future multifunctional device applications and fascinating physics. Bi-containing perovskite-type transition-metal oxide, which have been regarded as the most promising multiferroic materials. In these systems, the ferroelectricity is known to originate from a relative Bi–O displacement resulting from the stereochemical activity of the lone-pair Bi cations [17]. Many of such systems can be synthesized only in special conditions (e.g., under high-pressure). Nevertheless, they are of great interest because of their possible practical applications (e.g., as multiple-state memory elements, field sensors and tuneable magnets). Dielectric response of the high-pressure synthesized BiCrO3, BiCr0.9Sc0.1O3 and BiFe0.5Sc0.5O3 ceramics was studied in a temperature range of 30 – 650 K. The dielectric permittivity was measured in a cooling mode with a rate of 1 K/min. The measurements were performed in two frequency ranges. Between 20 Hz and 1 MHz, capacity and loss tangent were measured using an LCR meter HP-4284A. In the 2 MHz - 2 GHz range, a vector network analyzer Agilent 8714ET in a coaxial line was used. Broad dispersions and considerable dielectric losses were observed for all compositions. Therefore, we decided to investigate their direct current (DC) electrical conductivity, specific resistivity and electrical modulus. The calculated electrical conductivity was fitted with the Almond – West law, while specific resistivity and electrical modulus were fitted with Cole – Cole formula. In BiCrO3 dielectric anomaly appears at 419 K in temperature dependence, while in BiCr0.9Sc0.1O3 anomaly is visible in electrical conductivity and electrical modulus parameters at 480 K. The calculated electrical conductivity was fitted with Almond – West law, which describes the conductivity behaviors rather. From these data using the Arrhenius law we got the activation energy. Activation energies in BiCrO3 and BiCr0,9Sc0,1O3 before phase transition are close to each other but in paraelectric phase values differs. Specific resistivity and electric modulus activation energies in BiCrO3 and BiCr0,9Sc0,1O3 are ≈0.3 eV and in BiFe0.5Sc0.5O3 increase to ≈0.6 eV. In BiCr0.9Sc0.1O3, BiFe0.5Sc0.5O3 specific resistivity and electrical modulus frequency dependencies are visible input of grain and grain boundary conductivity. Comparing all compounds, a major impact on their dielectric properties is caused by Maxwell – Wagner polarization.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Paukšta, Vaidotas,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD193352573&prefLang=en_US