Institutional Repository of Vilnius University
Lazerio pluošto astigmatizmo atsirandančio neašiniuose veidrodiniuose teleskopuose kompensavimas /
Abstract
dc:descriptionMirror telescopes a very important in optical systems which are design for ultrashort pulses manipulation because of mirrors resistance for chromatic aberration. However, to use mirror telescope there is a necessity to decenter it and that is the reason to appear for astigmatism. In this paper is shown that P. Hello and C. N. Man paper „Design of a low-loss off-axis beam expander” suggested idea allows to compensate astigmatism, created by mirror telescope made of concave and convex mirrors, either the incident beam is collimated or not. In this paper for beam quality assessment is mainly used Strehl ratio that has reached 0,94 value for a beam after correctly configured mirror telescope. Results from experiment in which was used collimated beam shows that it is harder to mitigate astigmatism created by mirror telescope when incidence angle to first mirror telescope is increased (11° - Strehl ratio 0,94; 15° - 0,91; 20° - 0,89). The one more important mismatch between calculated astigmatism mitigation angle and experimentally identified angle is 0,65°. There are no important mismatches between theoretically calculated angles and angles obtained from simulation (the biggest mismatch was 0,1° when incident angle to first telescope mirror was 20°). In another experiment there was increased telescope magnification from 2,5 to 5 times and experimental results make sure that before mentioned method allows to compensate astigmatism, created by mirror telescope, for different beam sizes. Theoretically calculated optimal angle and optimal angle obtained from simulation matches perfectly but there is difference compared with angle obtained from experimental results and that different is 0,92°. In non-collimated beam case, whose source dimensions are 50,3 x 50,7 μm, there is no noticeable angle difference between theoretically calculated and simulated optimal angles. However, there is 1,45° angle difference compared to optimal angle obtained from experimental results. It is very likely that all mismatches happened because of: error in distances measurements between optical elements and also in error determinizing first telescope focal length, error in second mirror telescope calibration, error in spherical mirrors radii of curvature values, error in beam collimation that leaves second mirror telescope and the fact, that beam, produced by He-Ne laser, has elliptical shape with axis ratio 0,959. Thus, take into account all the results in this paper, it can be said that method which is suggest by P. Hello and C. N. Man in paper „Design of a low-loss off-axis beam expander“, allows to compensate astigmatism, created by mirror telescope made of convex and concave mirrors.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Logminas, Ramūnas,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD193353604&prefLang=en_US