Institutional Repository of Vilnius University
Metalų mikroapdirbimo pavieniais femtosekundiniais lazerio impulsais ir impulsų voromis tyrimai /
Abstract
dc:descriptionIn this paper, it is investigated which micro-machining method – single-pulse ablation or endless femtosecond pulse bursts with decreasing energy ablation, ensures higher efficiency and quality in steel processing. The paper reviews the theoretical material on ablation mechanisms, the interaction of ultra-short laser pulses with metals and the multi-pulse burst generating methods. There was also an overview of scientific articles on laser micro-processing using multiple femtosecond pulse bursts. For experiments, a 1030 nm central wavelength femtosecond laser was used, and multiple femtosecond pulse bursts were generated by incorporating a beam splitter into the scheme. Using different beam splitters with different reflection and transparency ratios at 1030 nm, multi-pulse bursts with different energy distributions were formed, respectively 28.3 µJ, 14.2 µJ, 8.3 µJ, 7 µJ, 3.5 µJ, 1.8 µJ, 0,9 µJ, 0,4 µJ, 0,2 µJ, ... and 17 µJ, 27,7 µJ, 8,3 µJ, 2,5 µJ, 0,5 µJ, 0,1 µJ, ... . The values of laser beam radius, ablation threshold and optimum laser peak fluence for single femtosecond pulses were experimentally determined. The quality of the different micro-machining methods was assessed by three different parameters: groove profiles, size of melt accretions and surface structure of the grooves. Alteration of groove profiles, when different galvoscanner scanning rates are used, was shown. Also, pictures of grooves formed with different microprocessing methods which made with a scanning electron microscope are compared. The efficiency of the microprocessing was assessed by the depth-to-width ratios of the grooves and the amount of material removed. It is displayed how both of these parameters depend on laser peak fluence, when different scanning rates are applied. It has been found that the highest amounts of material are removed by processing steel with endless femtosecond pulse bursts, using an energy distribution formed by a 50/50 beam splitter at low scan speed (100 mm/s), but these grooves have a low depth-to-width ratio (>0,2). The best depth-to-width ratio values are recorded when steel is processed with multi-pulse bursts with an energy distribution formed by a 30/70 beam splitter but using this beam splitter at fluences above 3 J/cm2 large melt accretions with a sectional area of <100 µm start to form. The grooves formed during micro-processing of steel using single ultra-short pulses can be characterized by a neat, tapering shape, decent depth and small size of the melt accretions.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2019
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Lubys, Augustinas,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD193353644&prefLang=en_US