Back to search

Institutional Repository of Vilnius University

Lazerių optinių elementų pažaidos slenksčio prognozavimo tyrimas: spinduliuotės erdvinių ir energinių parametrų įtaka /

Abstract

dc:description

Optical elements in laser systems, with constant exposure to high-intensity radiation, have a limit of resistance – the maximum threshold flow (below the threshold's limited operating time to damage) beyond which the element is irreparably destroyed. The optical element that has experienced a defect can no longer be used in the optical system, so the entire optical circuit ceases to operate. An international ISO standard methodology has been developed to determine optical resistance. Standardization is necessary in order to be able to compare the results, but the practice has shown that the results of the same standard do not always match the results in different laboratories even with identical samples. These discrepancies may be caused by laser sources used in the laboratories - in general, they may differ in the non-volatile properties of the spatial or energetic parameters of the fibers. Thus, the aim of this work is to theoretically and practically evaluate the influence of the non-volatility of the energy and spatial laser beam parameters on the results of the „S-on-1“ test and on the projection of these extrapolated results of the optical element durability. Using the Monte Carlo methodology in the LabView environment, a stochastic model of the damage experiment has been developed – a program that simulates the destructive interaction between laser radiation and matter. Digital tests were performed to change the parameters of laser fiber instability, and statistical samples of the sample damage data were obtained. Results are extrapolated using the mathematical models of the fatigue effect, commonly found in the literature. A study of the influence of test parameters on laser indused damage threshold (LIDT) prediction showed that in case of random defects, the S-to-1 test can be adjusted by increasing the laser exposure dose or laser beam diameter. When analyzing the influence of non-interfering laser beam parameters on the prognosis of LIDT, the accuracy is mainly influenced by the laser beam instability and the pseudo-fatigue effect caused by random defects is more sensitive to energy and diameter instabilityn of laser fiber than fatigue caused by the local accumulation phenomenon. The results of the experiment conducted in real conditions do not contradict the simulations performed. After the investigation of the selection of the safe fluence zone, the safe fluence was determined (with the assessed LIDT of the sample) depending on the instability of the laser beam. When the sensitivity analysis of the approximation model was selected, it appeared that if the model of extrapolation of the damage data is not known in advance, we can get the LIDT extrapolation with a large error because of the model.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kimbaraitė, Urtė,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Kimbaraitė, Urtė,. Lazerių optinių elementų pažaidos slenksčio prognozavimo tyrimas: spinduliuotės erdvinių ir energinių parametrų įtaka /. Institutional Repository of Vilnius University, 2019. https://repository.vu.lt/VU:ELABAETD193354081&prefLang=en_US