Institutional Repository of Vilnius University
Radijo dažnio plazmos šaltinio charakteristikų tyrimas ir jo pritaikymas ploniesiems Nb2O5 ir SiO2 sluoksniams formuoti taikant elektronpluoščio garinimo technologiją /
Abstract
dc:descriptionIn this paper ion energy spectra of radio frequency inductively-coupled plasma source were investigated and thin films of niobia and silica were deposited by means of ion-assisted electron beam (e-beam) evaporation to analyze their optical and mechanical properties. The measurements of ion energies and currents in argon and oxygen plasmas were carried out using Faraday-cup-based system. After the measurements it was revealed that the most probable ion energy mostly depends on the flow rate of ionising gas: lower flow rates result in greater energies of detected ions. There as no difficulties to ignite plasma using less argon quantities comparing to oxygen due to its lower ionizing energy. The ion current increases as increasing the gas flow rates (up to a certain limit) and radio frequency signal power transmitted to the source. The effects of certain energy ion beam on optical surfaces were tested by exposing the ion-beam-sputtered silica thin films. Their physical parameters such as physical thickness, extinction coefficient and surface roughness were evaluated before and after the experiments in order to compare them to each other. Most of the plasma source operating modes had a negative impact on the exposed surface as a result of its contamination and/or etching. However, insignificant effects were discovered to the tested substrates exposing them with lower ion density and low energy (110 eV) oxygen plasma. Niobia and silica single layers were deposited on fused silica substrates during ion-assisted e-beam evaporation processes applying the plasma source mentioned above. Niobia thin film optical properties seemed to be comparable to the properties of ion-beam-sputtered films and very stable despite of the energies of bombarding ions (higher than 175 eV). On the other hand, the lower stress values were indicated for films deposited with the most energetic (313 eV) ions of the assisting beam. Better physical properties (a lower extinction coefficient, refractive index and surface roughness) were obtained for silica layers using lower energy (110 eV) ion beam for deposition.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Samuilovas, Romanas,
- Contributors dc:contributor
-
- Juškevičius, Kęstutis
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD20217826&prefLang=en_US