Institutional Repository of Vilnius University
Elektroninis gręžimo gylio matuoklis /
Abstract
dc:descriptionOne of the fields where electronic devices aid the needs of a man is the field of constructional works. This field requires distance measurements, level calculations, leveling and range of other works. A required tool for any construction is an electronic drill. And yet one problem occurs when using this tool, how do you know that the hole you made is appropriately deep? The depth can be measured using a calibrated metal rod, but the rod can damage the surface of the wall. The solution for that would be to create a device that can measure depths but has no contact with any surface. Object of the work: to create a contactless drilling depth gauge. Aim of the work: to analyze similar devices; to design a principle electrical wiring diagram; to design a printed circuit board of the device, to create the according software; to carry out device testing; In the bachelor thesis 23 images and 11 different sources were used. The thesis comprises from 9 chapters. In chapter one an analysis of similar devices is carried out followed by a brief discussion about methods that can be used with contactless distance measuring. The best possible method was chosen for the assembly of built device. After selecting the method, the technology of ultrasound methods is reviewed in the following chapter called “The Overview of Used Technologies”. In the chapter called “The Structural Scheme of the Device” a structural scheme of the product is provided and concisely discussed. Basing upon the structural scheme of the product an electric scheme of the depth gauge was produced which is provided and explained in the section “Principal Electronic Schemes and Values”. Additionally a printed montage image of the scheme was designed and introduced. Following chapter which is called “Software” presented the algorithms of the electronic drilling gauge device. Algorithms explained how the device carries out calculations. After the device was assembled the tests were exercised, the results are presented in the chapter under the name of “Test Results”. Conclusion: A fully functional contactless drilling depth gauge was developed. The measurement showed that the maximum error of the gauge can reach up to 4mm.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Butkus, Egidijus,
- Contributors dc:contributor
-
- Daunys, Gintautas
Subjects
dc:subject × 1Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD2107656&prefLang=en_US