Back to search

Institutional Repository of Vilnius University

Formation and characterization of micro -opto -mechanical 3d devices for sensor application in transparent materials /

Abstract

dc:description

This dissertation focuses on the investigation of the etching selectivity in bulk fused silica modified with ultrashort laser pulses and fabrication of the complex 3D microfluidic devices. Here, the combination of a few topics is presented. The femtosecond laser-induced chemical etching technique (FLICE) was used for microchannels inscription in bulk fused silica. The broad range of the highly focused femtosecond pulses parameters was investigated for optimizing the microchannels etching rate. It was demonstrated that the optimal etching conditions were achieved for the channels fabricated with the multipulse irradiation and pulse duration exceeding ~ 700 fs. Microchannels inscribed with the tightly focused pulses of the 1030 nm wavelength showed ~ 20% better etching performance comparing to the 515 nm wavelength pulses. The etching selectivity was induced due to the volume nanostructures that were oriented perpendicularly to the laser beam polarisation. The nature of the nanogratings is not completely understood thus this phenomenon is under debate. By investigating the morphology of such nanogratings with the SEM microscope, it has been observed that the orientation of the nanogratings was slightly tilted with respect to the scan direction. This remark followed the discovery of the new phenomenon that demonstrated the nanogratings tilt dependence on the different scanning directions when laser polarisation was kept constant. The phenomenon was investigated under the different laser radiation parameters, and a theoretical model was proposed. It was demonstrated enhanced etching of the structures fabricated with the contour scanning method in combination with the linear or circular polarisation which also followed the minimized surface roughness (Ra~ 75 nm) of the microchannels fabricated with the optimal 200 nJ pulse energy and ~ 1 mm/s scanning speed. The practical applications of the FLICE technique were demonstrated by fabricating three different 3D microfluidic devices for fluid pumping, microchannels for ellipsometric application and challenging double-sided aspheric microfluidic lens for light focusing from the Y-shaped waveguide.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Stankevič, Valdemar,
Contributors dc:contributor
  • Račiukaitis, Gediminas

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
eng

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Stankevič, Valdemar,. Formation and characterization of micro -opto -mechanical 3d devices for sensor application in transparent materials /. Institutional Repository of Vilnius University, 2017. https://repository.vu.lt/VU:ELABAETD22935503&prefLang=en_US