Back to search

Institutional Repository of Vilnius University

Spinduliuotės krypties stabilizavimas parametrinio stiprinimo sistemose /

Abstract

dc:description

LASER BEAM-POINTING CONTROL IN OPTICAL PARAMETRIC AMPLIFICATION SYSTEMS Laser beam-pointing stability and control is a topic of great interest in modern science because of the increasing complexity of laser systems. Beam-pointing fluctuations, which are primarily caused by air circulation, convection, temperature, mechanical vibrations of optical mounts and the laser itself, can have a negative impact on the operation of such laser systems. High power ultrashort pulse laser system is being developed at Vilnius University Laser Research Center, which will be used for high-order harmonics generation in the not too distant future. In order to achieve the maximum generation efficiency, active beam-pointing stabilization system will be used. The system operates at 140Hz, uses cameras for position detection, linear piezo mirror mounts and PI feedback controller. The aim of this work was to investigate the beam-pointing stability of the system, indicate the sources that may cause instabilities and to determine the capabilities and shortcomings of the active beam-pointing stabilization system. Another goal was to experimentally check the sensitivity of optical parametric amplifiers to beam pointing deviations and to create an optical setup with an active feedback to ensure their long term stability. Multiple experiments were carried out in order to investigate the beam-pointing stability of Yb:KGW laser output. We determined that beam position of the laser can deviate by 100-200&#956;m after the initial start. Long term measurements showed that it can also deviate by as much as 100&#956;m during the day and also periods of high instability were observed. Further investigation showed that these periods are linked with the temperature of the laser frame, while ordinary oscillations correlate well with the current of the regenerative amplifier. Active beam-pointing stabilization system was examined with both experimental and numerical methods. We determined that the PI control operating at 140Hz is capable of reducing the fluctuations with frequencies of up to 14Hz. We also showed that the system can hold beam-pointing direction with <0.3&#956;rad standard deviation if high frequency deviations are not present. By conducting an experiment which imitates the working conditions of the future laser system, we demonstrated that the beam position can be contained within 5&#956;m radius with a standard deviation of 1.2&#956;m over 10m distance from the laser. By modulating the input beams directions of parametric amplifiers we determined their angular input range, which is 370&#956;rad for noncolinear parametric amplifier and 250&#956;rad for passive carrier envelope phase stabilization system, calculated at 80% of the maximum power. We also observed that the output beam of the latter system experiences beam-pointing fluctuations that are 9 times larger than the input. Furthermore, we created an optical setup providing active beam-pointing stabilization for both parametric amplifiers and demonstrated 4% power stability over the whole day.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Straigis, Šarūnas,
Contributors dc:contributor
  • Varanavičius, Arūnas

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Straigis, Šarūnas,. Spinduliuotės krypties stabilizavimas parametrinio stiprinimo sistemose /. Institutional Repository of Vilnius University, 2016. https://repository.vu.lt/VU:ELABAETD23239125&prefLang=en_US