Back to search

Institutional Repository of Vilnius University

Morfologijos ir elektrinių savybių tyrimas organiniuose TQ1:[60]PCBM:[70]PCBM tūrinės heterosandūros saulės elementuose /

Abstract

dc:description

The nanoscale morphology of bulk heterojunction solar devices has a great impact on the performance. In this bachelor thesis it was tested how the performance of solar devices is affected by the weight ratio between donor:acceptor (D:A) and between two different acceptors, mixing of the non-halogenated solvents, thermal annealing and the mobility of the faster charge carriers. The active layer of the devices was spin-coated from Poly[[2,3-bis(3-octyloxyphenyl)-5,8-quinoxalinediyl]-2,5-thiophenediyl] (TQ1), phenyl-C61-butyric acid methyl ester ([60]PCBM) and phenyl-C61-butyric acid methyl ester ([70]PCBM) solution and sandwiched in the ITO/PEDOT:PSS/active layer/LiF/Al structure. The photovoltaic characteristics were obtained illuminating the samples with the white light from the solar spectrum simulator (AM1.5 G). The evaluation of the morphology was accomplished with the help of Atomic Force Microscope (AFM) images and Photoluminescence (PL) signal (425 nm exciting wavelength). In order to determine the mobility of the faster charge carriers CELIV measurements were carried out. The devices prepared from the blend with the 1:2 ratio between donor and acceptor had the largest jSC, FF and PCE, 5.12 mA/cm2, 0.54 and 2.51 % respectively. [70]PCBM led to a larger phase separation and poorer device performance; the devices with no [70]PCBM had the largest jSC, FF and PCE, 5.97 mA/cm2, 0.54 and 2.91 % respectively. Neither blend of o-xylene and toluene nor pure toluene improved the performance of solar cells; the devices from the toluene solution had the lowest jSC, FF and PCE – 2.81 mA/cm2, 0.39 and 0.99 %. Thermal annealing did not boost the performance; the not annealed samples (5:8:2) had the higher jSC, VOC and PCE than the annealed devices. The observed mobility of the faster charge carriers had little if any influence on the efficiency of the investigated devices.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Galvelytė, Austėja,
Contributors dc:contributor
  • Važgėla, Julius

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Galvelytė, Austėja,. Morfologijos ir elektrinių savybių tyrimas organiniuose TQ1:[60]PCBM:[70]PCBM tūrinės heterosandūros saulės elementuose /. Institutional Repository of Vilnius University, 2016. https://repository.vu.lt/VU:ELABAETD23239215&prefLang=en_US