Back to search

Institutional Repository of Vilnius University

Biojutiklių technologijoje pritaikomų 3D spausdinimo plastikų elektrocheminis bei mikrogravimetrinis testavimas /

Abstract

dc:description

This work studied eight plastics used for 3D printing: four thermoplastics (PLA, PETG, PP, ASA) and four photopolymer resins (ABS-like, ECO, WWC). The study aimed to investigate the suitability of these plastics (thermoplastics and photopolymers) for use in the production of biosensors by means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and quartz micro-weighing (QCM) techniques. During the experiment, plastic cells were filled with different solutions: PBS (pH 7), 0.01 M H2SO4, and 50 mM Py solution. The changes in the electrochemical properties of the solutions after 24 hours and 7 days of contact with the plastic were investigated using EIS and CV. In addition, microgravimetric studies were carried out to assess the solubility of the plastic films in deionized water by QCM, measuring the changes in the resonance frequency associated with the mass change of the films. The results showed that photopolymers showed a higher dissolution rate (on average about 23 %) compared to thermoplastics (on average about 3 %) within 20 hours. The ASA film showed the lowest swelling, only about 2 %. Electrochemical studies showed that the capacity of double electrical layer increased in PBS and H2SO4 solutions, indicating possible release of impurities from the plastic. In contrast, the capacity of pyrrole in PBS decreased, probably due to a decrease in pyrrole concentration. Overall, the results indicated that cell printed from thermoplastics demonstrated higher chemical stability.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Vaicekauskaitė, Evelina,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Vaicekauskaitė, Evelina,. Biojutiklių technologijoje pritaikomų 3D spausdinimo plastikų elektrocheminis bei mikrogravimetrinis testavimas /. Institutional Repository of Vilnius University, 2025. https://repository.vu.lt/VU:ELABAETD239013157&prefLang=en_US