Institutional Repository of Vilnius University
Naujas kalcio hidroksiapatito sintezės iš šalutinio gamybos produkto fosfogipso metodas /
Abstract
dc:descriptionPhosphogypsum is a by-product generated during the production of phosphoric acid. Currently, large amounts of it are being stored in landfills, which has led to the search for methods of its secondary utilization. The aim of this bachelor’s thesis was to analyze the phosphogypsum produced at the "Lifosa" factory, and to use it in the synthesis of a bioceramic material calcium hydroxyapatite (Ca10(PO4)6(OH)2). The results on the synthesis and characterization of composite of Ca10(PO4)6(OH)2 with malachite green were also presented in this study. X-ray diffraction (XRD). Fourier-transform infrared spectroscopy (FTIR) and thermal analyses confirmed that the main phase of phosphogypsum is gypsum (CaSO4·2H2O). SEM images revealed that the surface of phosphogypsum consists of variously oriented, large (20-30 μm in size) plate crystals and small gypsum derivatives. Smaller particles covering large phosphogypsum crystals were also observed in higher resolution SEM images. These may be secondary amorphous phases not recorded during XRD analysis. BET analysis determined that phosphogypsum is characterized by macro and meso pores. Most particles are 10-35 nm in size. EDX, AAS and XRF analysis methods revealed that calcium and sulphur are the main elements constituting phosphogypsum. In addition to these elements, small amounts of aluminium (Al), strontium (Sr), iron (Fe), silicon (Si) and phosphorus (P) were also detected in the samples. For the first time, the by-product phosphogypsum was successfully used to synthesize calcium hydroxyapatite by the solution-precipitation method. The XRD results of the synthesized sample confirmed that using a mixture of disodium hydrogen phosphate (Na2HPO4) and sodium dihydrogen phosphate (NaH2PO4) as the starting reagents, single-phase calcium hydroxyapatite was formed after 192 hours. FTIR analysis confirmed that the obtained product is calcium hydroxyapatite. SEM images of the synthesized calcium hydroxyapatite showed that using the same synthesis method but different reagents, particles of very different sizes and shapes are obtained. The developed synthesis method was fo the first time used to synthesize a composite of calcium hydroxyapatite with malachite green. The inhibition zone test showed that the composites of calcium hydroxyapatite and malachite green exhibit antimicrobial properties. It was shown that gram-positive bacteria (Staphylococcus aureus) are significantly more sensitive to the effects of calcium hydroxyapatite and malachite green powder than gram-negative (Pseudomonas aeruginosa).
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Jurevičiūtė, Simona,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD239013257&prefLang=en_US