Institutional Repository of Vilnius University
Kūginio stiprio charakteristinių verčių nustatymas pagal Eurokodą 7 taikant duomenų filtravimo metodus /
Abstract
dc:descriptionIn this final thesis, the application of Eurocode 7 in determining the characteristic values of cone resistance is analyzed. A characteristic value, defined by a statistical method (prEN 1997- 1:2019-10), is determined by considering the fractal distribution of the investigated property and applying a specific calculation scheme. The use of these values can significantly facilitate the solution of engineering problems in both research and design fields. Characteristic values have a high level of reliability, and it is ensured that the calculated values are representative and accurately reflect real conditions. One of the most important aspects in determining a characteristic value is the high quality of the investigations, during which the obtained values are considered representative. Often, due to specific geological conditions or researcher errors, some of the values are not representative. To ensure data quality and accuracy, various statistical filters are used, which allow the elimination of inaccuracies and the formation of maximally correct data required for the calculation of characteristic values. When calculating characteristic values, it is important to know that they are of two types: a value calculated from local values collected in a specific location is called a local characteristic value, and a value calculated by forming a general data base from one engineering geological layer is called a global characteristic value. A global characteristic value is considered representative of the entire study area, because data from the entire study area are used in its calculation. In comparison, a local characteristic value is representative only in a specific location. In this work, characteristic values are calculated for selected engineering geological layers in the territory of Vilnius Airport (Rodūnios kel. 2, 2B, A. Gustaičio g. 4, Vikingų g. 19, Vilnius), applying various statistical filters for data cleaning. The effectiveness of the filtration methods is compared with unfiltered data. During the research, it became clear that not all geological layers are sensitive to data filtration, and often the difference between filtered and unfiltered data is small. However, there are cases when data filtering leads to significant differences between the data. By changing the number of values when calculating the global characteristic value, its changes and dependencies are observed. Starting with a small data sample and gradually increasing it, one can observe the fluctuations of the characteristic value. Once a limit is reached, where fluctuations decrease until finally, regardless of the sample size, the characteristic value will not change by more than a certain interval, it is considered that the data has stabilized and the global characteristic value is reliable.When examining soft soils, a high coefficient of variation is observed. The most likely reason for this high value is the small average value of the sample. If the average is very small, even a small change in standard deviation can lead to a large coefficient of variation. The idea of the work is to show that obtained results can be applied in practical engineering geology, helping designers and researchers choose optimal research methods and evaluate the reliability of soil properties. This is especially important when designing structures that may be affected by soil variability.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Barkovski, Darius,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD239023589&prefLang=en_US