Back to search

Institutional Repository of Vilnius University

Nedrenuoto kerpamojo stiprio verčių palyginimas taikant triašį ir vienaašį gniuždymo metodus /

Abstract

dc:description

This thesis investigates and compares the undrained shear strength (cu) of tills (moraine) determined by two common laboratory methods: the Unconfined Compression Test (UCT) and the Unconsolidated Undrained (UU) triaxial compression test. The aim of the work is to evaluate and compare the cu values obtained from these methods, to describe in detail the (UU) test methodology based on practical execution, and to provide practical insights regarding the application of these methods in geotechnical engineering investigations. The experimental program involved 10 Unconfined Compression Tests and 17 Unconsolidated Undrained triaxial tests performed on till soil samples. For comparative analysis, 10 pairs of (cu) values from (UCT) and (UU) tests were evaluated. A very strong positive linear correlation was found between (cu) values (coefficient of determination R2=0.9562, correlation coefficient R≈+0.98). However, in most cases (9 out of 10), the (UU) values were higher than the (UCT) values. The ratio varied over a wide range from 0.64 to 3.22, with a mean value of approximately 1.71, indicating considerable variability in the difference between the two methods. Both (UCT) and (UU) values showed theoretically consistent qualitative dependencies on water content (strength decreases with increasing w) and dry density (strength increases with increasing ρd) and plasticity index. The strength of these linear correlations is very strong. A detailed step-by-step (UU) test methodology is also presented in this work, based on personal practical experience and learning from the testing process. The main conclusions indicate that while (UCT) and (UU) results are strongly correlated for the tested tills, the (UCT) method tends to yield lower (cu) values more often than the (UU) method, and the magnitude of the difference is highly variable. The (UU) test is considered more representative of in-situ stress conditions due to the application of confining stress (σ3) and is less sensitive to sample disturbance and suction effects compared to the (UCT).

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Turovskis, Darijus,

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Turovskis, Darijus,. Nedrenuoto kerpamojo stiprio verčių palyginimas taikant triašį ir vienaašį gniuždymo metodus /. Institutional Repository of Vilnius University, 2025. https://repository.vu.lt/VU:ELABAETD239023986&prefLang=en_US