Back to search

Institutional Repository of Vilnius University

Įvairių formų plonų metalo lakštų pjaustymas femtosekundiniu lazeriu vandenyje /

Abstract

dc:description

Ultrashort pulse laser systems are widely used in fields like material science, metrology, medicine, telecommunication, energetics, and so forth. Due to the demand for quality and fast fabrication of thin metal sheets (1 um - 250 um) (for microelectronics, biomedicine, lithography shadow masks, optoelectronics, microelectromechanical systems (MEMS), and so forth production), these laser systems becoming of great interest in the industry, especially in the micromachining area. Due to the demand of higher fabrication throughput and smaller scale component manufacturing, more advanced technologies are needed. In this work thin metal sheets were studied by using a femtosecond pulses, optimization of the process was carried out to get the best and fastest cuts, also high aspect ratio wires and a functional component were produced. Cutting of materials is realized by covering the thin metal films with a thin layer of water, due to high energy densities the formation of a filament occurs which allows high quality cuts of the sample. The experiments were carried out using an Ytterbium femtosecond laser system generating laser pulses of approximately 260 fs. Cutting times dependence on 3 parameters: scanning speed (50 - 1500 mm/s), repetition rate (60 - 610 kHz), average laser power (5 - 15 W) were investigated. A galvanometric scanner was used in combination with an f-theta (f = 100 mm) lens. Optimization was done and the shortest cutting times were completed with parameters: scanning speed (v=1000 - 1500 mm/s), repetition rate (f=430 kHz), average laser power (P=13 W); 4 cm x 40 um wires were cut out of copper (50 um thick), with ablation rate of 8mm/s and invar alloy (125 um thick) with ablation rate of 3,2mm/s, samples; at 13W average laser power, 430kHz laser repetition rate, 1000mm/s, out of one copper sheet, with ablation rate of 51,8mm/s, a functional component(25mm x 35mm) was produced, which is going to be integrated into a micromechanical system to position thin wires.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Baravykas, Tomas,
Contributors dc:contributor
  • Butkus, Simas

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
lit

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Baravykas, Tomas,. Įvairių formų plonų metalo lakštų pjaustymas femtosekundiniu lazeriu vandenyje /. Institutional Repository of Vilnius University, 2016. https://repository.vu.lt/VU:ELABAETD24077333&prefLang=en_US