Back to search

Institutional Repository of Vilnius University

Investigation of surface parameters of ci26 polymer after femtosecond pulse laser processing /

Abstract

dc:description

Vision impairment remains a major global health problem, particularly in older adults. A common solution for restoring vision after cataract is implantation of intraocular lenses (IOLs). IOLs are typically manufactured by precision mechanical machining followed by post-polishing to achieve the required optical quality. Ultrashort-pulse laser processing is a potential alternative that can enable fast, software-defined surface modification and micromachining. This work aimed to characterize femtosecond-laser interaction with the CI26 hydrophilic acrylic IOL polymer at 1030 nm wavelength, with emphasis on ablation thresholds, incubation effects, and surface roughness evolution. A further aim was to assess whether gigahertz-burst irradiation could condition pre-processed surfaces toward lower roughness. A femtosecond laser micromachining system operating at 1030 nm wavelength was used to generate single-pulse and multi-pulse irradiation for CI26 polymer ablation and surface modifica-tion. In addition, gigahertz-burst pulse packets were applied as a post-processing step to evaluate parameter-dependent surface conditioning. A clear single-pulse ablation threshold of approximately 2.42 J/cm² was measured, with a strong incubation effect that reduced the threshold toward approximately 0.48 J/cm² at high pulse counts. Raster processing showed that surface roughness is dominated by total delivered energy per unit area and pulse overlap, ranging from severe roughening (up to Ra = 15.8 µm) to substantially smoother processed surfaces (down to Ra ≈ 0.1 µm) under reduced overlap conditions. In the tested GHz-burst window, roughness improved relative to the pre-texturized state (minimum Ra = 0.38 µm) but did not achieve the unprocessed surface roughness baseline of Ra = 0.2 µm. Even though a slight improvement in surface roughness was obtained, further studies of processing parameters are required to achieve suitable results.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Andriušiūnas, Antanas Kristupas,

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
eng

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Andriušiūnas, Antanas Kristupas,. Investigation of surface parameters of ci26 polymer after femtosecond pulse laser processing /. Institutional Repository of Vilnius University, 2026. https://repository.vu.lt/VU:ELABAETD277691667&prefLang=en_US