Back to search

Institutional Repository of Vilnius University

Fabrication of opaque 3d microstructures using multiphoton lithography and their characterization /

Abstract

dc:description

3D laser direct writing has been employed as a technology of rapidly increasing importance, finding its applications in various fields, especially in micro-optics, with a growing demand for transparent and opaque three dimensional microstructures, where opaque microelements play essential roles, especially for stray light suppression, beam blocking and beam absorption. While Two Photon Polymerization (TPP) enables the fabrication of complex, high resolution free-form 3D structures, the construction of opaque microstructures remains challenging, due to the strong absorption of opaque photoresists in the UV to near-infrared spectral regime. Moreover, most of the previous demonstrations of opaque microstructures have been achieved using organic photoresists, which limit the mechanical and thermal performance of the fabricated components. In this work, truly opaque and inorganic microstructures are fabricated using a hybrid organic-inorganic photoresist as the precursor material, providing a viable alternative to organic precursors, with improved chemical inertness and mechanical robustness. The hybrid resist is optically transparent during fabrication, enabling efficient photopolymerization, which turns opaque only after thermal post-processing. Using femtosecond laser-based TPP, the smallest feature size of 810 nm was achieved with the hybrid resist. The fabricated structures were subjected to pyrolysis at 1000 °C, in an inert nitrogen atmosphere at a temperature ramp of 1 °C per minute to remove the organic fraction of the structures, yielding opaque and ceramic microstructures. Systematic optimization of laser parameters was performed through the fabrication of an array of test structures, with varying laser power and scanning velocity, enabling the construction of robust free-form microstructures with sub-micrometer feature sizes. Post pyrolysis characterization of structures confirmed the formation of opaque and inorganic microstructures which were further analyzed for opaqueness, surface roughness, structure composition, and shrinkage behavior, indicating strong absorption of light upto 99.07% for 633 nm and 100 % for 510 nm wavelength. The analysis of the surface quality also showed an improvement in the surface roughness upto 24% post pyrolysis. These results demonstrate a versatile route for producing opaque and ceramic microstructures using the hybrid organic-inorganic precursor, combined with the high geometric freedom and resolution provided by TPP. They also highlight the potential applications of such structures especially in micro-optics, which require opaque and thermally stable microcomponents such as apertures, beam blockers and absorbers at the microscale.

Degree

thesis:*
Grantor dc:publisher
Institutional Repository of Vilnius University
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mohan, Abhinay Vats,

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • info:eu-repo/semantics/openAccess
Language dc:language
eng

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Vilnius University
Base URL
epublications.vu.lt/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Mohan, Abhinay Vats,. Fabrication of opaque 3d microstructures using multiphoton lithography and their characterization /. Institutional Repository of Vilnius University, 2026. https://repository.vu.lt/VU:ELABAETD308110988&prefLang=en_US