Institutional Repository of Vilnius University
Investigation of new emitting matterials for blue oled aplications /
Abstract
dc:descriptionOrganic light-emitting diodes are one of the most important technologies in modern display and lighting applications, being used in the screens of most televisions, smartphones, and other devices. However, efficient and stable blue emitters remain one of the key challenges in this field. Blue emission requires high excited state energies, which is why such devices often suffer from faster degradation, lower efficiency, or insufficient colour purity. In this bachelor's thesis, two newly synthesised MR-TADF emitters, DB1TNF and tDB2TNF, were investigated. The main objective of the work was to evaluate their photophysical properties, suitability for the emitting layer, and potential to improve device performance through a fourth-generation hyperfluorescent architecture. Spectroscopic measurements confirmed that both compounds exhibit narrow emission and delayed fluorescence, characteristics typical of MR-TADF emitters. DB1TNF exhibited deeper blue emission but had a weaker TADF effect. Meanwhile, tDB2TNF demonstrated more pronounced delayed fluorescence and better device stability, however its emission was red-shifted towards the green region of the spectrum. Using both emitters, devices were fabricated achieving an external quantum efficiency of 23% and stability of up to 42 hours at 1000 cd/m² initial luminance. During the work, the photophysical and electrochemical parameters of the compounds were determined. UV-Vis absorption and time-resolved photoluminescence measurements allowed the optical properties of the compounds to be evaluated. The effect of emitter concentration in the mCBP host matrix was also investigated in order to select an appropriate doping level and minimise the influence of aggregation. As the TADF properties of the investigated emitters were limited, a hyperfluorescent system employing DMeCzIPN as an assistant dopant was designed to improve triplet harvesting. The HOMO and LUMO energy levels of the compounds were determined by cyclic voltammetry. OLED devices were fabricated by vacuum thermal evaporation. The results obtained revealed a clear relationship between device emission colour, efficiency, and stability, highlighting the necessity of balancing these parameters. The DB1TNF emitter exhibited deeper blue emission, however due to its weaker delayed fluorescence contribution, the OLED devices showed stronger efficiency roll-off. In contrast, the tDB2TNF emitter, with a small ΔE_ST = 80 meV and more pronounced TADF effect, showed red-shifted emission towards the green region. The hyperfluorescent architecture significantly improved exciton utilisation, tripling device efficiency and doubling stability.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Bagdonas, Kristupas,
Subjects
dc:subject × 1Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- eng
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD308116625&prefLang=en_US