Institutional Repository of Vilnius University
Aktyvinės antenų gardelės su viena radijo dažnio įėjimo pakopa kūrimas ir tyrimas /
Abstract
dc:descriptionThe goal of this final thesis is to design, implement and investigate a 2x2 active antenna array for GNSS L1 band, capable of electronically controlling the phase and attenuation of each antenna element. The use of the designed system is as a practical beamforming demonstrator that can illustrate the operating principles of phased antenna arrays and controlled reception pattern antennas (CRPA) while using a simplified architecture with a single radio frequency input stage. To achieve this goal, the theoretical principles of GNSS signal reception, phased antenna arrays, constructive and destructive interference, beam steering, adaptive beamforming, and RF phase control were analysed. The practical implementation of the system was built with four active GNSS L1 antennas arranged in a 2x2 array geometry with \lambda/2\ spacing between adjacent elements. The antenna array was controlled using a „Raspberry Pi Pico“ microcontroller together with PE44820 digital phase shifters and PE43713 digital attenuators. SPI communication was used for fast synchronization of phase and attenuation settings, while I²C communication and PCF8574 expanders were used for antenna power management. The developed architecture allowed independent control of each antenna channel and electronic beam steering without physically rotating the antenna system. System characterization and calibration were performed using a “LibreVNA” vector network analyser and automated measurement algorithms. Additional “MATLAB” simulation tools were created to simulate different antenna array configurations and compare theoretical beam patterns with experimental measurements. The antenna array was experimentally evaluated inside an anechoic chamber using a calibrated WRD10180 transmitting antenna and a “Rohde & Schwarz” R&S®ZNB43 vector network analyser. The measured radiation patterns demonstrated that the system was capable of electronically steering the main beam. The results demonstrated that a simplified active antenna array with a single RF input stage can successfully perform practical GNSS beamforming and directional signal control.
Degree
thesis:*- Grantor dc:publisher
- Institutional Repository of Vilnius University
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Liaugaudas, Paulius,
Rights
dc:rights- Statement dc:rights
-
- info:eu-repo/semantics/openAccess
- Language dc:language
- lit
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.vu.lt/VU:ELABAETD308117212&prefLang=en_US